jjr

sorry craig thought you meant the front fog not sure about the back mate never had the panel off

Did you go in through the indicator to remove the whole unit .Its just three nuts then you should just unplug the connector swap the unit bud Jim

where abouts you gettin it setup mikey im needin mine done have heard clcm at sighthill is good jim

Tried for a quote but they wont cover my z

I read the other day that now the hole in the ozone layer now helps keep the artic cooler after them saying for years it was causing the earth to heat up by letting some sort of rays through they havent a clue :confused: Jim

oops meant 314 :D

313 ;)

I cant really say what 5mm will look like stance wise because i cant put the car on the ground because the wheel isnt fitting I'll try the 5mm spacers and see, maybe squeeze in some 15's on if ive got the room cheers for the info Chris When you gettin some pics up of the new wheels Jim

Just got myself a set of cruise 135's and they are just touching the calipers on the front so im goin to phone the seller (dp motorsport off ebay )and tell them ill try spacers first before i return them,my question is what are the thickest spacers i can use before i need to start lookin at longer studs or the bolt on spacers They are 33 et by the way Cheers Jim

This way is different from the link you posted mate the way you have them the arm is quite near the shock whereas the other way round the shock has plenty of clearance Just a thought

I think i will stick with 18's i did notice the ride was a bit harder when i went from 17's to 18's right enough bud

I remove the complete unit arms and balljoints in the hubs jeff

Just a quick question guys ive got a driftworks hicas eliminator kit but mines the electrical type so the question is do i just disconnect the rack and remove the hicas bulb or is there something else i have to do Also would running 19's on kyb's and eibach springs give a harsh ride ta muchly Jim

This is what im after just want too tidy it up need to keep my wonga to sort out my sqirmy back end:wack:

Have you had experience with them before mate

Thanks bud but a bit too far for me might try the one shrek suggested bit nearer, nice pics by the way mate liking the lambo doors and the colour:bow:

No shrek just meant paint the bumper and wings poss bonnet so the car looked the same colour overall Jim

Nice setup seems a shame to hide it behind a bonnet and bumper Jim

Tbh i would go for a solid colour like the whites as touching up doesnt mean a whole side respray cos your girlfriend opens the door against a small wall and chipped the paint It happened to my mates pearl yellow S2000 but it never got painted cos a drunk driver put him into the central reservation on the M8 about a month later :mac1: Jim

Im just wanting it tidied up till after the year when ill get the front blended in so doesnt need to be perfect just another job struck off the list lol Thanks for the help Jim

How was the match ive heard that kh6 is quite hard to match Jim

As heading says how much would i be looking at to spray a frp bumper in pearl white just lookin to get an idea of cost before i start lookin around I know i should get it blended in but monies tight so just wanted it resembling the rest of the car till i can get it done right was goin to take it off and refit it myself once painted Cheers jim

Any yank muscle car that Chip Foose has worked his magic on :bow:

Done

I ran datascan on the z tonight and got these readings Right sensor 0.7 when revved droppped to 0.00 Left sensor 0.42 when revved dropped to 2.4 Could anyone tell me if i have a problem The car seems to run fine although tickover is sometimes a little lumpy Jim