faisal

Sorry mate, just read this now.... Iv actually changed both of these already to find the fault..... The passenger side does not actually lock either via the key or the central locking now. Any ideas?

Need to check but i dont think it does anymore

Need to find one and replace it and see if that fixes it... Thanks

Iv had the car apart since the respray fixing various issues and finally can see the light at the end but have only one problem left and i cant figure out what im doing wrong. Car is a 1990 Jap Import Have a Clifford alarm installed and for years the central locking worked fine. All of a sudden the passenger side door lock does not work but the drivers side does. Have the door cards off and there is a solenoid attached on drivers side, all fine.... passenger side door does not, have checked the Standard actuators and they receive power and work fine. Cannot figure out what's wrong, it doesn't seem to receive any signal from the drivers side, is there a central locking unit on the car and where is it.... Iv searched for threads but can seem to find anything that i haven't already checked What am i missing?

Hi Does anybody have one of these? Heres a link to a better idea of what i want... need it urgently https://www.z1motorsports.com/tops-and-trimming/nissan/oem-top-glass-grommet-p-6472.html Thanks in advance

https://photos.app.goo.gl/f1M9RJeooMzaZRcc9 https://photos.app.goo.gl/2WP99C7SD1Mctxs96

This is my car currently

Any chance i can delete this and start again lol - - - Updated - - - Is that yours..... very nice, something about purple

https://photos.app.goo.gl/dCSix6GLoHJKp6Wv7 https://photos.app.goo.gl/u8gPw7ao6oM6AVKv5 https://photos.app.goo.gl/Eockayw6bUs2HDFR9 - - - Updated - - - Where did the edit function go on this forum, how long has it been like this?

I do like the midnight purple but the problem being is will it suit the wheels with a matte black finish. https://photos.google.com/share/AF1QipM2TFxLwGn9nncZYh8YS2jgoNplwnc4CA73cPIVfFNZYY4oaVBlOIdsUVG4zdLFoQ/photo/AF1QipMJgCDfgyeO9w4wiCiP3OKMTr4iR1oDAJTeQjUT?key=ZjA4RU1BUFR3TzlWUjZ3UTVhQ2dxNDVrREIyWExn I keep thinking white as originally it was white and would match things. https://photos.google.com/share/AF1QipM2TFxLwGn9nncZYh8YS2jgoNplwnc4CA73cPIVfFNZYY4oaVBlOIdsUVG4zdLFoQ/photo/AF1QipMdVppM4tQ64Af3gNEM7dkwNvjyAIBPnxUFTI8H?key=ZjA4RU1BUFR3TzlWUjZ3UTVhQ2dxNDVrREIyWExn But Black does look awesome https://photos.google.com/share/AF1QipM2TFxLwGn9nncZYh8YS2jgoNplwnc4CA73cPIVfFNZYY4oaVBlOIdsUVG4zdLFoQ/photo/AF1QipMYxZIrcRB-i09dUVW7GGhAfNqWkHsKMmeJwiXW?key=ZjA4RU1BUFR3TzlWUjZ3UTVhQ2dxNDVrREIyWExn

Sorry cant edit the above post but have reposted these in order below https://photos.google.com/share/AF1QipM2TFxLwGn9nncZYh8YS2jgoNplwnc4CA73cPIVfFNZYY4oaVBlOIdsUVG4zdLFoQ/photo/AF1QipOw-Y_A9biRaZJgGJO6dLTgDGun6dvlClzmVA36?key=ZjA4RU1BUFR3TzlWUjZ3UTVhQ2dxNDVrREIyWExn https://photos.google.com/share/AF1QipM2TFxLwGn9nncZYh8YS2jgoNplwnc4CA73cPIVfFNZYY4oaVBlOIdsUVG4zdLFoQ/photo/AF1QipPLAWzeAk0tCDSQXqEs32CnFTTCyhFjQvN5Hobx?key=ZjA4RU1BUFR3TzlWUjZ3UTVhQ2dxNDVrREIyWExn https://photos.google.com/share/AF1QipM2TFxLwGn9nncZYh8YS2jgoNplwnc4CA73cPIVfFNZYY4oaVBlOIdsUVG4zdLFoQ/photo/AF1QipPOfyfyJ7d2gybPHC4OoJDdGgOu1RIQZbI3ihgY?key=ZjA4RU1BUFR3TzlWUjZ3UTVhQ2dxNDVrREIyWExn https://photos.google.com/share/AF1QipM2TFxLwGn9nncZYh8YS2jgoNplwnc4CA73cPIVfFNZYY4oaVBlOIdsUVG4zdLFoQ/photo/AF1QipMJgCDfgyeO9w4wiCiP3OKMTr4iR1oDAJTeQjUT?key=ZjA4RU1BUFR3TzlWUjZ3UTVhQ2dxNDVrREIyWExn https://photos.google.com/share/AF1QipM2TFxLwGn9nncZYh8YS2jgoNplwnc4CA73cPIVfFNZYY4oaVBlOIdsUVG4zdLFoQ/photo/AF1QipPhVTaAxuelw5huKnAJ43soP8004nuYYT8wi2Q4?key=ZjA4RU1BUFR3TzlWUjZ3UTVhQ2dxNDVrREIyWExn https://photos.google.com/share/AF1QipM2TFxLwGn9nncZYh8YS2jgoNplwnc4CA73cPIVfFNZYY4oaVBlOIdsUVG4zdLFoQ/photo/AF1QipN1ga8qre0XlHcY2qbX41wf880jGiHLz7vGLS6W?key=ZjA4RU1BUFR3TzlWUjZ3UTVhQ2dxNDVrREIyWExn https://photos.google.com/share/AF1QipM2TFxLwGn9nncZYh8YS2jgoNplwnc4CA73cPIVfFNZYY4oaVBlOIdsUVG4zdLFoQ/photo/AF1QipPhVTaAxuelw5huKnAJ43soP8004nuYYT8wi2Q4?key=ZjA4RU1BUFR3TzlWUjZ3UTVhQ2dxNDVrREIyWExn https://photos.google.com/share/AF1QipM2TFxLwGn9nncZYh8YS2jgoNplwnc4CA73cPIVfFNZYY4oaVBlOIdsUVG4zdLFoQ/photo/AF1QipN3i4zV7v2s0-5q8DAF2DFfi1ITmY8mJ_Rr8sUJ?key=ZjA4RU1BUFR3TzlWUjZ3UTVhQ2dxNDVrREIyWExn https://photos.google.com/share/AF1QipM2TFxLwGn9nncZYh8YS2jgoNplwnc4CA73cPIVfFNZYY4oaVBlOIdsUVG4zdLFoQ/photo/AF1QipMdysWefOSN6GvNqVAj5gt0pSavzQdHjW7rb-2i?key=ZjA4RU1BUFR3TzlWUjZ3UTVhQ2dxNDVrREIyWExn

give me 2 mins, just trying to fix that, making them public as we speak

I have owned the car for nearly 16 years and have decided its time for a new respray. I was considering going back to the original pearl white but with a fresh new twist but cant seem to get the right pearl white combination i want. https://photos.google.com/photo/AF1QipPMDMS4viDqbf7ZJiqwXh0mQedoE-E1KHHB1O02 Also im considering midnight purple pearl, i would spray the wheel centres matte black and leave the polished rim in this case - pic 2 https://photos.google.com/photo/AF1QipMgnM89tuuDPlFSXBFeBhNoN9dWv1INkMhRYXwd https://photos.google.com/photo/AF1QipNQfhOjWiWSean978bIplRo0ubQaK0QkPfvMVwu https://photos.google.com/photo/AF1QipPL1ED6GEXablXYOirUIu9ltyah3VxXxpB1D-wj I have seen a few other colours also but just not sure what to do https://photos.google.com/photo/AF1QipOTI1xMygCFdt-G2V_0OqTkwrwHwRkN1YOyVCNd https://photos.google.com/photo/AF1QipPxQE4669GIXWV_Ndd37gB8JqrGk3W_ho1MjQ6B https://photos.google.com/photo/AF1QipOZnjLB86hdrmRe7AemT_AleCM7KWCYoYdEs8En The car is quite large and with the wide arch kit i just wanna make sure i dont go over the top but enough to make it stand out Any advice or opinions on colours would be appreciated. https://photos.google.com/photo/AF1QipNNEuztr4TksVvrK_7EZtwuTKTXTV3oU1K05wPA https://photos.google.com/photo/AF1QipNIWVUZzyFdPCfm0zrL0sa4QMIWT5_Vs1WDXg6E

Looking for a clean good condition filter that sits at the bottom end of the fuel pump Let us know if anyone has one Not the one that fits on the swb.... lwb only.... this one shouldint have the long hose hanging underneath it which then goes to the filter Thanks

Thanks mate...... something to think about

That's the question, i keep here conflicting reports that the original rods were not forged...... some people say they are and others say no they're not Id be happy with 500 to 550bhp all day long and my cars purely a weekend fun car, i don't go crazy with it Shes running 400bhp now quite easily and it seems pretty solid, hasint skipped a beat Budget unfortunately restricts me paying for it to be assessed as iv blown that all on turbos and various other bits so i'm trying to make a calculative decision on what we know so i can decide on how much to push the engine to

I purchased a newly built engine about a 2 years ago with the following spec Full Bottom end rebuild Balanced and honed Wisco 88mm Pistons ARP Main & Stud Kit NGK Sparks Cometic head gasket what kinda power could a engine of this type handle safely without me starting to worry.... I have the supporting mods to get more power now but im concerned to what the engine can actually handle.... before i start fitting the turbos and injectors etc etc..... what can it do? Was it a mistake not having the rods also? Thanks in advance

Well iv just purchased some, at the minimum iv been told i need the adapter kit, lets see how it goes when they turn up, thanks for the help guys

Does anybody know if RB25DET Injectors fit the Z32s Iv got a 1990 engine...... Trying to get hold of some bigger injectors and looking around on prices as the bills are escalating with new turbos and various other bits im having to spend cash on.

Cheers mate, thats all i wanted to really know was if its a good quality product or not, if go ahead and buy it and it turns out to be complete piss then it turns out to be a waste of money and mostly time, the setting up im not to fussed how long that takes.... once its done its done The one i posted above is specific to the Z32 so i would assume it is correct for the housing, but have emailed them to double check. Have you had any issues with your PMAS sensor?

Yeah I have, most people recommend them and say they're good but ideally i wanted some opinions from the 300zx community but couldn't find much.... Only thing i could find was Nistune doing a few vids on them and so im going to assume they're good or better then the standard MAF (or am i wrong)

I have checked google but not many references to the 300zx, mostly american cars and the other jap brands etc etc Nevermind, ill wait and see what they reply to me over at PMAS and may give it a go Thanks anyway

Well a friend of mine is a mapper so im not worried about that and he has access to a dyno my main concern are if these are any good over the standard MAF and worth buying

http://www.pmas-maf.com/product/mz32/ product info

http://www.pmas-maf.com/product-category/search-by-vehicle/300zx-90-96/ Has anybody had any experiences with these, a lot of people in the states are using these apparently.... I know Nistune recommend them in a few of their videos Fas