ALZ300

they were 17"s or 18"s ? Do you have any other photo's ? rear ?

place getting in + out of the car !:rolleyes::cool: ha,ha,ha Some big rims like these you say ??? [/img]

are fitted. Even lowered with the spacers and the rims on there now, it still wont L@@K right . havent tried the spacers on it yet with the car on the ground !!! but i still think it wont look right .

Have all the interior panels that had that shit-tweed on them off getting re-covered now like this. [/img] Will have to wait to do the seats ! $$$ lol Exhaust at the rear has to be altered to suit the new rear bar/kit ,nothing major. then Coilovers maybe some Teins with control box in car. :cool:

this week. all the new (used) front bar has been prepped + primed also doors / new (led) mirrors and most of the car as well . Hatch and a few other things to go this week ! trim down where the kit sits near the tank etc :smash: Im still Un-sure where to put the reverse-camera now, so it cant be seen ! Any tips I know they make bolt-lights ! but do they make a camera yet (besides screw-cam) with the same sort of design ???? [/img] [/img] [/img] I'll be doing the :hyper: when i finally see it in the booth & old mate sprayin the f-ucker :hyper: lol

It took me that long to just get a widebodied kit made,then was lost in transit etc etc So anyway i ended up with 2 widebody kits (one spare for the next Z ) in the end with all the f-uckin-about. But im glad i did it all, so far anyway. And theres not to many of them around here :D Not as yet anyway.

. what do you think of that colour choice ?? [/img] (i dont think that bit of side-skirt should be sticking out so far on the porsche's wheel arch:shock:! lol) also a pic of my widebody upgrade as of today without rear wheel spacers bolted on. ! I Need coilovers badly now ! :o [/img] [/img]

Your Z is & will L@@k the part then Stella ! Nice clean (low)ride ,have always kept an eye on it from afar mate. Yes ive always admired the candy red, but i do like the ducati red, and i read on one of their forums that the Toyota Super Red is a very,very close match. Would've liked to see one (300zx) in that exact colour ! which i think Steve's (u.k member) is getting close to the mark. (dogcock-red) ! a few posts back. i dont want it to be to dark but not to light either with the widebody & front bar (personal choice). Got some nice wheel adapters from the U.S for the wheels on the car now (17x9.5) , just until i can afford some new rims. (sooon). cause with the rims comes the coilovers(control in cabin) and a brake upgrade also. (it never ends:rofl:)$$ [/img] I like the way this blue one looks + sits with the arches. [/img]

Your's is looking good (by sig pic) ! i thought i read somewhere it was up for sale ! then it wasnt ?? :confused: didnt think you would part with it after all the kit work /paint etc,etc . Cheers Al

later in the week.

Im going to try some round round LEDs (2 each side) for now ! I have been toying with this idea for for a while now, but havent followed through with anything as yet. [/img] One piece light panel with the Vantage lights in them ! Only an idea though ! Not far off the Z rear lights in a way !

light. Hopefully a Ducati red or something similar will suit the front bar and wide arse ? , I took it to a bloke i knew from years ago in the trade. Still have a long way to go yet though. I dont want to drive it till its completely finished, well thats the plan anyway. :rofl: Oh sorry, I live in Australia by the way. Cheers ALZ300

Havent heard that one for a while. Love that mix of the porshe gaurds/ Tornado red ! any photo's of it in the sun light. This was mine before. [/img] This is where it was at 2 weeks ago ! [/img] [/img] [/img]

as im trying to decide on a final colour of Red for my widebodied Z ?? (which is in the panel shop Now being done !) and i have to make a decision in the next week or so . So if any1 has any pics of some different colours of the red on some zeds would help me make that awkward decision ? [/img] [/img]

Got it sorted now.

[/img] :confused:

[/img] Up to dry fit stage in this pic ! :hyper: [/img] [/img] [/img] Also one piece light panel to go in there (without the 2x center reverse lights) and trying to decide on what rounds to run or maybe try some chrome surrounds around the LED's that are in there for now. All panels will have no joins (except for front bar) . Still have to purchase a rear window Tub ! and so on ! + on It never seems to end.lol

So then that would make it a D-Speed Porsche replica front bar ! I have the front Bar + not the car ! It's being fitted to mine now (with MR2 clears) along with the widebody kit and finished off with a complete re-spray in red . I personally think it should sit quiet well with the wide arches.

but ive search and searched and cant seem to find it anywhere ?? :confused:

with toyota MR2 lights in it ? [/img]

Curious ! as i am seriously thinking of purchasing one in the near future for my wide arched Z (in shop now) and would like to compare quality/ price/ shipping to Australia as well. Got to try and save a where i can for the other things in life !lol. :duffer:

guards ? I did mean to include the coilovers in the 1st thread :smash: I would love to see some pics of any cars with that Wide body set-up ???

higher profile tyre to fill up the bigger arches ?? (any pics please of 17's with 60mm spacers + wide arches) ??? Body shop is still only up to dry fit stage at the moment. I know i have to get the hub centric 60mm spacers and not sure whether to start L@@King for the 18's or 19's for the rear now ? [/img] photo taken off cell phone.sorry.

I just wasnt sure if the fibreglass would stick to it and cock up and crack etc further down the track ? I wouldnt mind seeing a photo of the finished unit with the 8" or 7"inch car-puter screen installed ?? When you say "skim-filled" ? do you mean after f/glass you gave it a wipe with some putty to fill in any little pit marks/holes ? Ive got a 7'inch screen going in there also, & i also need to hide small mobile DVR + LAN box somewhere (hidden but with easy access) ,and this hooks up to the front + rear IR /movement sensor camera's !. Havent done much fibreglassing before but will have a crack at it. Cheers !

Im looking to fill in the hole completely, where the clock went in the stereo facia plate ? is there any way of filling in the hole then bog it /sand it/ and paint the same colour as the car ? its made of a hard plastic (i think). Im installing a double din dvd player and i dont want that hole there.! also i dont want to have to resort to installing a turbo timer or similar in there Any suggestions would be much appreciated !