Hi People, I'm after some advise and help please, after having problems with my car now for more than 3 years, decided to do a clyinder compression test, all right hand clyinders are fine, but the middle left clyinder was less than half, after doing a pressure test all the air was escaping through the exhaust meaning exhaust valve. What type of job is it to remove the head, is it a job i can do at home? If so where can i get the parts from ie head gasket kit, bolts, valves etc? Also is there an detailed online manual with step by step guide and torque settings etc?

 

Thanks Again All

 

Many Regards Andy

Anyone?

 

Regards Andy

Hi People, I'm after some advise and help please, after having problems with my car now for more than 3 years, decided to do a clyinder compression test, all right hand clyinders are fine, but the middle left clyinder was less than half, after doing a pressure test all the air was escaping through the exhaust meaning exhaust valve. What type of job is it to remove the head, is it a job i can do at home? If so where can i get the parts from ie head gasket kit, bolts, valves etc? Also is there an detailed online manual with step by step guide and torque settings etc?

 

Thanks Again All

 

Many Regards Andy

 

hi bud

 

for all your hardware, contact mr mike feeny (mjp autos) here on the traders section. as for online manuals, i think andy p on this forum has a site with technical info.

 

hth

 

alan