Right, finally managed to get the rear wheel bearing lock nut undone and now I can't work ot how to get the rest apart.

 

I have tugged, pulled, hit and shouted at it but I can't get anything else to budge!

 

Any help/ideas would be greatly appreciated.

Anyone?

Should be 1 big nut (27mm ??) and 4 smaller nuts (17mm) to undo from memory

Cool - thanks.

 

Do I have to remove all the springs etc to get to them? (are they hidden behind?)

Cool - thanks.

 

Do I have to remove all the springs etc to get to them? (are they hidden behind?)

 

:confused:

 

Im guessing you have sold the rear brakes and handbrake mechanism/backplates to a 200sx owner ?

 

In which case you need to remove the hub from the subframe (17mm and 19mm nuts and bolts on each arm) . Undo the Large driveshaft nut...knock the driveshaft off.

 

Your then with the complete hub carrier and rear brakes (caliper, discs, handbrake mechanism/backplate).

 

You can either send them that, or you can also remove the hub carrier as well - undo the 4x17mm nuts on the back and the 24mm nut. Pull off the hub carrier and send them whats rest.

Edited July 9, 200817 yr by Yowser

Yes a 200sx owner want them all.

 

Thats great thanks. Be glad when I have finished breaking this Zed - never again!!

THanks guys - flippin' hard work but they came off in the end! :)