Hi gang,

 

I have either got these or they are about to be delivered :hyper:

 

1) Front Adjustable Tension Rods

http://cgi.ebay.co.uk/NISSAN-300ZX-SKYLINE-R32-R33-FRONT-TENSION-RODS-DRIFT_W0QQitemZ220211571731QQihZ012QQcategoryZ40192QQcmdZViewItemQQ_trksidZp1713.m153.l1262

 

2) Front Adjustable Upper Links

CheerZ Chunk (I know, I bought them a long time ago)

 

3) Rear Anti Roll Bar Drop Links

http://cgi.ebay.co.uk/Nissan-200SX-S13-S14-300ZX-ARB-Rear-Bushes-Drift-Spec_W0QQitemZ350032210203QQihZ022QQcategoryZ40192QQcmdZViewItemQQ_trksidZp1713.m153.l1262

 

4) Energy Suspension Rear Anti Roll Bar Bushings

Can't remeber who I bought them off, sorry :o but CheerZ anyway :)

 

5) Energy Suspension Front Anti Roll Bar Bushings

Can't remeber who I bought them off, sorry :o but CheerZ anyway :)

 

6) UK Spec Rear Anti Roll Bar

CheerZ tttam :)

 

7) Prop Centre Bearing

CheerZ j1mmytt :)

 

8) Grooved Front Brake Discs and Pads Mintex Xtreme

http://cgi.ebay.co.uk/NISSAN-200SX-300ZX-GROOVED-BRAKE-DISCS-MINTEX-XTREME_W0QQitemZ360036316013QQihZ023QQcategoryZ23013QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

9) Trust Greddy Profec B Spec II Boost Controler

http://cgi.ebay.co.uk/NEW-TRUST-GREDDY-PROFEC-B-SPEC-2-II-BOOST-CONTROLLER_W0QQitemZ290217573582QQihZ019QQcategoryZ32094QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

10) Z-Centre Leather Seat and all Trim Panel Covers

http://www.zcentre.co.uk/shop/index.php?cPath=21_43_67

 

 

What I'm after is instruction/procedure/guide, do's or don't on all of the above (other than No8. LOL :D)

 

I have heard the the Profec B II can be fitted in the stock clock position, is this true ? I would also like a guide to fitting the entire unit and guides to the others.

 

 

CheerZ Peeps and sorry it's so many questions in 1 thread but I thought I'd keep it all together :D

 

Paul :)

I got those front tension rods and they didnt fit , they did not have enough adjustment and wouldnt go small enough, had to take them to a fabricator to have a bit of the shaft removed and the threaded portion in the shaft lengthened, they have offered me money off my next purchase with them

I got those front tension rods and they didnt fit , they did not have enough adjustment and wouldnt go small enough, had to take them to a fabricator to have a bit of the shaft removed and the threaded portion in the shaft lengthened, they have offered me money off my next purchase with them

 

Ah shit, It lists 300ZX although not Z32 :confused:

I got those front tension rods and they didnt fit , they did not have enough adjustment and wouldnt go small enough, had to take them to a fabricator to have a bit of the shaft removed and the threaded portion in the shaft lengthened, they have offered me money off my next purchase with them

 

So they are too long rather that too short, how strange :confused:

i believe the skyline rods are longer, thats what i was told anyway, so thats what i think i ended up with

Hi gang,

 

I have either got these or they are about to be delivered :hyper:

 

1) Front Adjustable Tension Rods

http://cgi.ebay.co.uk/NISSAN-300ZX-SKYLINE-R32-R33-FRONT-TENSION-RODS-DRIFT_W0QQitemZ220211571731QQihZ012QQcategoryZ40192QQcmdZViewItemQQ_trksidZp1713.m153.l1262

 

2) Front Adjustable Upper Links

CheerZ Chunk (I know, I bought them a long time ago)

 

3) Rear Anti Roll Bar Drop Links

http://cgi.ebay.co.uk/Nissan-200SX-S13-S14-300ZX-ARB-Rear-Bushes-Drift-Spec_W0QQitemZ350032210203QQihZ022QQcategoryZ40192QQcmdZViewItemQQ_trksidZp1713.m153.l1262

 

4) Energy Suspension Rear Anti Roll Bar Bushings

Can't remeber who I bought them off, sorry :o but CheerZ anyway :)

 

5) Energy Suspension Front Anti Roll Bar Bushings

Can't remeber who I bought them off, sorry :o but CheerZ anyway :)

 

6) UK Spec Rear Anti Roll Bar

CheerZ tttam :)

 

7) Prop Centre Bearing

CheerZ j1mmytt :)

 

8) Grooved Front Brake Discs and Pads Mintex Xtreme

http://cgi.ebay.co.uk/NISSAN-200SX-300ZX-GROOVED-BRAKE-DISCS-MINTEX-XTREME_W0QQitemZ360036316013QQihZ023QQcategoryZ23013QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

9) Trust Greddy Profec B Spec II Boost Controler

http://cgi.ebay.co.uk/NEW-TRUST-GREDDY-PROFEC-B-SPEC-2-II-BOOST-CONTROLLER_W0QQitemZ290217573582QQihZ019QQcategoryZ32094QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

10) Z-Centre Leather Seat and all Trim Panel Covers

http://www.zcentre.co.uk/shop/index.php?cPath=21_43_67

 

 

What I'm after is instruction/procedure/guide, do's or don't on all of the above (other than No8. LOL :D)

 

I have heard the the Profec B II can be fitted in the stock clock position, is this true ? I would also like a guide to fitting the entire unit and guides to the others.

 

 

CheerZ Peeps and sorry it's so many questions in 1 thread but I thought I'd keep it all together :D

 

Paul :)

 

The profec will fit with a little dremelimg bud couple of mins an its done

The profec will fit with a little dremelimg bud couple of mins an its done

 

Nice one mate, just need to know how to fit the rest of it :o

i.e. wiring, plumbing etc.

here's my profecB II in situ

Bump

 

1)

2)

3)

4)

5)

6)

7)

9)

10)

 

:o :confused: :D

 

I'm gonna have a go at fitting 3, 4 and 6 tomorrow afternoon, is it just a case of unbolt and bolt the new one on or is there more to it than that i.e. applying tension to anything ?

 

CheerZ

Right Iv'e done 3, 4, 5, 6 and 7 and I can't believe the difference 3, 4, 5 and 6 have made, the rear is just so much more stable :)

 

On 7 though I'm still getting slight vibtation, could there be something else wrong, prop out of balance or something ? It has been off before as there are already marking on it to align it :confused:

I assume you have instructions for 9 ?

But here they are anyway.. It may help you a little more..

 

LINK:

http://www.xspeed.com.au/manuals/Greddy_Profec_B_manual.pdf

Right Iv'e done 3, 4, 5, 6 and 7 and I can't believe the difference 3, 4, 5 and 6 have made, the rear is just so much more stable :)

 

On 7 though I'm still getting slight vibtation, could there be something else wrong, prop out of balance or something ? It has been off before as there are already marking on it to align it :confused:

 

 

gearbox rear mount allowing the box to sag and pulling shaft out of alignment

gearbox rear mount allowing the box to sag and pulling shaft out of alignment

 

 

Will check that, nice one, is it easy and cheap LOL :slap:to replace ? or is it prop off again :(

 

as for number 9 GUMBALL300 I don't actually have the unit yet but it's on it's way :dance: I'll read through the link :D

Gearbox mount is real easy just make sure you support the gearbox and losen the engine mounts so they dont split, take off the metal bracket holding the gearbox then unbolt mount and bolt the new one back in, its a bit fidgity to get the mount located but apart from that its just an on and off job.

 

I wasnt getting any vibration at all with that prob bearing and nothing that is already making noise ie gearbox and diff but thats just coz all my bits are uprated.

Oh no, not this thread again I here you cry :rolleyes:

 

But here goes anyway, I'm gonna have a go at

 

1) Front Adjustable Tension Rods

http://cgi.ebay.co.uk/NISSAN-300ZX-S...713.m153.l1262

 

2) Front Adjustable Upper Links

CheerZ Chunk (I know, I bought them a long time ago)

 

and, well, I may as well call it A) that I forgot off my original list :rolleyes: so,

 

A) ROD ASSY-CONNECTING,STABILIZER

http://www.courtesyparts.com/betasite/54618-rod-assy-connectingstabilizer-300zx-z32-1990-1996-p-40767.html

 

Bought from MJP, cheerZ Mike

 

Now it is Number 2 (very similar to these http://www.smithys-place.co.uk/images/product%20imgs/sus001_large.jpg but not the same) that concerns me as I have read and heard that they have to be fitted a certain way around, can anyone help me out here ?

 

CheerZ

Paul

Yes mate you have to fit them the same way they come off. Search is your friend.

Yes mate you have to fit them the same way they come off. Search is your friend.

 

 

 

:confused:

They were never on, they are new to replace my old upper links

Well, other than 5, 8, 9 & 10 all fitted now and I'm hoping I've done it right :rolleyes::rant::)

1) Front Adjustable Tension Rods

http://cgi.ebay.co.uk/NISSAN-300ZX-SKYLINE-R32-R33-FRONT-TENSION-RODS-DRIFT_W0QQitemZ220211571731QQihZ012QQcategoryZ40192QQcmdZViewItemQQ_trksidZp1713.m153.l1262

 

2) Front Adjustable Upper Links

CheerZ Chunk (I know, I bought them a long time ago)

 

3) Rear Anti Roll Bar Drop Links

http://cgi.ebay.co.uk/Nissan-200SX-S13-S14-300ZX-ARB-Rear-Bushes-Drift-Spec_W0QQitemZ350032210203QQihZ022QQcategoryZ40192QQcmdZViewItemQQ_trksidZp1713.m153.l1262

 

4) Energy Suspension Rear Anti Roll Bar Bushings

Can't remeber who I bought them off, sorry :o but CheerZ anyway :)

 

5) Energy Suspension Front Anti Roll Bar Bushings

Can't remeber who I bought them off, sorry :o but CheerZ anyway :)

 

6) UK Spec Rear Anti Roll Bar

CheerZ tttam :)

 

7) Prop Centre Bearing

CheerZ j1mmytt :)

 

8) Grooved Front Brake Discs and Pads Mintex Xtreme

http://cgi.ebay.co.uk/NISSAN-200SX-300ZX-GROOVED-BRAKE-DISCS-MINTEX-XTREME_W0QQitemZ360036316013QQihZ023QQcategoryZ23013QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

9) Trust Greddy Profec B Spec II Boost Controler

http://cgi.ebay.co.uk/NEW-TRUST-GREDDY-PROFEC-B-SPEC-2-II-BOOST-CONTROLLER_W0QQitemZ290217573582QQihZ019QQcategoryZ32094QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

10) Z-Centre Leather Seat and all Trim Panel Covers

http://www.zcentre.co.uk/shop/index.php?cPath=21_43_67

 

 

All done apart from 9 and 10 left to do now :nana2:

10) Z-Centre Leather Seat and all Trim Panel Covers

http://www.zcentre.co.uk/shop/index.php?cPath=21_43_67

 

Bet you're looking forward to doing this one :D

Bet you're looking forward to doing this one :D

 

 

 

:rofl::rofl::rofl::headvswal NOPE lol :slap: