quick question, is it an easy job to remove the front wing? will i have to take the front bumper to do it?

 

cheers

Nick

Depends if you want to put that wing back on again! :D

yer i will be putting the wing back on again

ah... im out of ideas then i had in mind an anchor chain a telegraph pole and a couple of harnessed oxen... probably effective but not so if you want to reuse ;)

 

Sorry - someone help the chap!

Hmmmmmmm tempting idea!

yer i will be putting the wing back on again

easypeasy! remove arch liner,bolt under the wing mirror(viewable as you open the door) bolts along top of panel(don`t forget to check under the rubber bits if still there) then finally there`s two nuts where the wing meets the bumper(adjct to the headlight,these can be a bit fiddly n soak em first as can be rusted) and a couple more behind the indicator/jap blank/uk,these are part of a bracket that keeps the bumper flush and secure,shine a light behind from arch area and you`ll see,will need 10mm spanner /wratchet or what have you.Then wiggle..lots..when everybodys stopped laughing return to the car n remove wing.Good luck!

Wing Removal.

 

http://www.twinturbo.net/ttnetfaq/FAQpages/fender.html

 

Front bumper removal if you need to. ;)

 

http://www.twinturbo.net/ttnetfaq/FAQpages/faciaremoval.html

Can you remove a wing without taking the bumper off?

Just Taken a pair of wings of this weekend and it is really very easy and straight forward. Straightening the twisted metal under the N/S wing may prove harder, but I know a man who can with a lazor Jig. So little red will ride again and Spare parts (my £1500 ebay SWB bought to be a doner and ended up being a little corker) wont have to be condemed for its organs.

easypeasy! remove arch liner,bolt under the wing mirror(viewable as you open the door) bolts along top of panel(don`t forget to check under the rubber bits if still there) then finally there`s two nuts where the wing meets the bumper(adjct to the headlight,these can be a bit fiddly n soak em first as can be rusted) and a couple more behind the indicator/jap blank/uk,these are part of a bracket that keeps the bumper flush and secure,shine a light behind from arch area and you`ll see,will need 10mm spanner /wratchet or what have you.Then wiggle..lots..when everybodys stopped laughing return to the car n remove wing.Good luck!

 

Cheers Santa ....great info i want to replace with the fibre glass Vented ones ... do you anyone who has done these :-)

 

Thanks n Cheers

 

Bobba