As anyone bought and new studs for the front wheels and if so do you remember the pitch of the studs

Front stud size = 12mm x1.25 thread with a 14.3mm diameter spline

 

Rear stud size = 12mm x1.25 thread with a 12.9mm diameter spline

Hi taff thanks for replying. Do you know if that it a fact 14.3mm diameter spline, reason I ask is because I have just got 10 to replace the ones on my car but they seem to be to large. I have measured the ones I have taken out and the measure 14.1. I just want to make sure before I try forcing the new ones in. The last thing I want to do is f**k up my hub

Yes 14.3 same a 200sx 14 fronts ,the old ones maybe a bit smaller as they have been taken out .The hubs arnt acually splined from new they just get pulled threw and cut there own splines.

ok I will have another go tomorrow then

Chris,you will need to hammer/press em' in mate they are tight! ;)

Before ive put a socket over the new stud then put a wheel nut on a tighten it to pull the new stud through.

Job sorted, Thanks for you input guys. Will post some pics soon of Shels new wheels and chin spoiler now the wheels are fitted