A mate of mine had a great set of 18" alloys on his MR2 and said I can have them for nowt!!! Will they fit without mods?

A mate of mine had a great set of 18" alloys on his MR2 and said I can have them for nowt!!! Will they fit without mods?

 

Hi..

The PCD and Offset are OK, but the centre bore on the wheels for a 91> MR2 is only 60mm, whereas the 300zx z32 is 66mm.

 

Here is a handy wheel info table to keep in your favourites:

 

LINK

 

http://www.carlsalter.com/old_wheel_fitments.html

Hi..

The PCD and Offset are OK, but the centre bore on the wheels for a 91> MR2 is only 60mm, whereas the 300zx z32 is 66mm.

 

Here is a handy wheel info table to keep in your favourites:

 

LINK

 

http://www.carlsalter.com/old_wheel_fitments.html

it all depends on if the wheels have a spigot ring in them you may beable to get away with putting a different ring in the centre if its large enough. measure the bore.

it all depends on if the wheels have a spigot ring in them you may beable to get away with putting a different ring in the centre if its large enough. measure the bore.

 

Agreed.. The wheels may have a large enough bore to fit the zed, and may just have spiggot rings to decrease the size for MR2 fitment.

As Gaz says, find out what the centre bore of the wheels is (minus any spiggot rings that may be fitted) ;)

take 1 of them into an alloy wheel shop and ask, they usualy supply them for about £10 for the set.