fyrkat Posted June 26, 2007 Share Posted June 26, 2007 another 3 weeks now before me and my mate attack my Z and take the engine out. still trying to get used to all the Zed'isms and things i should do, here is what i am going to do so far 1 - Have tubs rebuit, inc 360 bearings and staggered oil seals 2 - replace all water and oild hoses at the back of the engine 3 - change cambelt whilst its out does this sound ok or are there other things i should be doing? i found small metal tubes in the vac line to the wastegates are these boost jets? should i leave em in there or take em out? what about things like boost jets, controllers, vac guages? turbo timers? should i be doing any of this while its out. any info appreciated Ta Andy Quote Link to comment Share on other sites More sharing options...
ChrisC Posted June 26, 2007 Share Posted June 26, 2007 Replace the 2 small metal pipes behind the water pipes on the front of the engine. I'd replace the water pump if it hasn't been done at 60K with the cambelt. The pipes are dead cheap and a common failure and they come off anyway to do the cambelt. You can get a 60K service kit from Z1 Motorsports I think which is a bit of a bargain, inc water pump, cambelt etc etc. Sounds like you already have boost jets so might as well leave em in :) Quote Link to comment Share on other sites More sharing options...
fyrkat Posted June 27, 2007 Author Share Posted June 27, 2007 bump Quote Link to comment Share on other sites More sharing options...
TopLess Posted June 27, 2007 Share Posted June 27, 2007 Replace det sensor and associated loom! Do turbo/plenum water bypass Replace rear main seal Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.