The clock has four wires coming out the back and into a plastic plug.

Can anyone please tell me what colour wire goes to where?

Blue

Black

Green

White

I would think you would have a + feed , + Ignition feed, -, and light feed to dim it, I'm sure Andy should know

Come on Mr P :)

Ian - I'll be back in a few moments with a picture and where the wires go ................................

Right then

 

Clock------------> Car

 

White ------------> Blue/White

Black ------------> Black

Blue/White -------> Yellow

Green/White -----> Green/Red

 

Yellow = perm +12v

Green/Red = Lighting dip

Black = Earth

Blue/White = 12 volt switched

 

Hope that helps :)

i see someone has time on there hands !

Right then

 

Clock------------> Car

 

White ------------> Blue/White

Black ------------> Black

Blue/White -------> Yellow

Green/White -----> Green/Red

 

Yellow = perm +12v

Green/Red = Lighting dip

Black = Earth

Blue/White = 12 volt switched

 

Hope that helps :)

 

 

Thank you very much Phil :bow: :bow: :bow:

i see someone has time on there hands !

 

 

My car interior is in bits as it's about to have a re-trim, and anyway I'm on late shifts this week :tongue: :rofl:

i'm on an early shift , oh joy

sorry to hi jack the thread Mac ..but the yellow 12volt permanent feed to the clock etc ...do you know which fuse its fed from ??? ive lost the 12volt feed on that same cable

thanks

 

Steve

sorry to hi jack the thread Mac ..but the yellow 12volt permanent feed to the clock etc ...do you know which fuse its fed from ??? ive lost the 12volt feed on that same cable

thanks

 

Steve

 

Not yet Steve all I know at this stage is my clock does not work and it is not the clock. I now need to test each wire to see if they all have a connection at the other end.

sorry to hi jack the thread Mac ..but the yellow 12volt permanent feed to the clock etc ...do you know which fuse its fed from ??? ive lost the 12volt feed on that same cable

thanks

 

Steve

 

Did you find this out as mine has lost feed to ??

Did you find this out as mine has lost feed to ??

 

Can you not highjack the perm + feed from the stereo or ciggy lighter?

Does the interior light work? They're both fed from the same fuse