Ok, well I've searched high and low, and finally found the diag for power mirrors in the online service manual ('Body' page 40)

 

Problem : Passenger mirror does not fully extend to 'clunk' when operated like the drivers mirror. Has a little play in the 'out' position(only a cm), which can mean it gets moved slightly by wind. Drivers side is fine. Am thinking it's just something thats needs tightening.

 

Questions: Anyone else ever had the same problem?

Are the mirrors easy to take apart?

Have you got to prise the mirror glass off with a screwy?

Or do you wiggle the screwy side to side?

How much for a new glass when I break it? :xxx:

 

I know it seems a daft ???? but this has been bugging me for over a year now :headvswal and I want to get it sorted

 

ANY help, tips, ideas, abuse will be greatly appreciated

 

Cheers guys

 

Brett

....

Have you got to prise the mirror glass off with a screwy? NO!

Or do you wiggle the screwy side to side? Not quite.

...

Place the screw driver into the hole, as shown in the diag on page 40, and turn the driver. Then the glas should be able to be removed and you can obtain access to the 'Guts' of the mirror.

 

HTH

 

Dave

Place the screw driver into the hole, as shown in the diag on page 40, and turn the driver. Then the glas should be able to be removed and you can obtain access to the 'Guts' of the mirror.

 

HTH

 

Dave

 

Sweet, cheers Dave :bow: