Movie sharing

Followers

January 15, 200620 yr

Does anyone know how I can publish a movie so you can all see it please.

Its about 17Mb and is viewable in media player.

Quote

Replies 32
Views 1.1k
Created 20 yr20 yr
Last Reply 20 yr20 yr

Popular Days

January 16, 200620 yr

Author

Thanks Martin. It will save me doing the MSN thing and it taking for ever. :bow:

Quote

January 16, 200620 yr

or just buy Clarcksons hot metal DVD as I did BECAUSE I CANT GET BROADBAND AND MISS ALL THE GOOD VIDEO CLIPS YOU GUYS POST :headvswal

I remember downloading the Z dream commercial last year. took me about 9 hours, stayed up all night to see 30 seconds of film!

Quote

January 16, 200620 yr

I loved that clip...... made me smile... horrah.. for the 300zx...

Quote

January 16, 200620 yr

click for clip and others

Quote

January 16, 200620 yr

thanks loads T-Pot and Vini, downloading as am writing this. :duffer: :nana2:

Quote

January 17, 200620 yr

HERE a LiST of sites of where to upload

Bis 50MB:

freefilehosting.net: 3MB

desearch.net: 4MB

1-filehost.midnightirc.info: 10MB

11mbit.de: 10MB

wirefiles.com: 6MB

fh25.de: 25MB

webfile.ru: 20MB

slil.ru 50MB

load.to: 25MB

mytempdir: 25MB

loadto: 25MB

myfileshack.com: 25MB

glintfiles.net : 30MB

ultrashare.net: 30MB, 30 Tage

ripway.com: 30MB

uploadtemple.com: 30MB

sendmefile.com:30MB

illhostit.com:40MB

filebuffer.net: 40MB

uploadhut.com: 50MB

extremeshare.de: 50MB

pinkupload.dl.am: 10MB

upload.by/FastShare: 30MB

dateihosting.de: 25MB, min. 100 Tage

friendlyshare.de: 50MB

bonpoo.com: 50MB

files.to: 50MB

--- Ab 50MB:

meinupload.com: 75MB

turboupload.com: 70MB

filehd.com: 60MB

sharefreaks.com: 60MB, bis zu 4 Monate

rapidshare.de: 100MB, 30 Tage

crazyupload.de: 100MB

dropload.com: 100MB, 7 Tage

filecache.de: 125MB

extremeshare.ath.cx: 150MB

updownloadserver.com: 50MB, 30 Tage

sharebigfile.com: 250 MB, 7 Tage oder 250 Downloads

myfilestash.com/myfilehut.com: 250MB

simpleupload.de: 250MB

hemenpaylas.com: 250MB

uploading.com: 250MB

rapidupload.com: 300MB

upload24.info: 200MB

filefactory.com: 500MB und 1,5GB

megashare.com: 1,5GB

megaupload.com: 500MB, 30 Tage aber total langsam!

spread-it.com: 500MB, 14 Tage

ftpz.us: 880MB sch****ender Speed

up.li.ru: unbegrenzt? (russisch)

yousendit.com: 1GB, 25 Downloads oder 7 Tage

datapickup.com: 1,5GB

sendspace.com: 1,2GB

hosting-place.de: 1GB

zupload.com/index.php: 500MB, 30 Tage

sexuploader.com: 500MB, 90 Tage

Bonpoo.com: 250 MB

exslides.com/uploader/upload.html: no limit

freeaspupload.net: no Limit

zupload.com: 500MB

uploadport.com 500MB

now i want to see alot of Zed movies :) enjoy.

Quote

January 17, 200620 yr

Is it just me or when ur watching it it is really jumpy and gets real annoying after 15seconds

Quote

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.

Reply to this topic...

Followers

Go to topic listing

No registered users viewing this page.

Replies 32
Views 1.1k
Created 20 yr20 yr
Last Reply 20 yr20 yr

Popular Days

No registered users viewing this page.

ADAMZX's OEM+ 2000spec Version R Replica Conversion & Rebuild Project Build Thread

HYDRAULIC BRAKE PISTON RESTORATION PROCESS
The next phase of the brake caliper restoration process involves inspecting and restoring the hydraulic brake pistons that were removed from both the front and rear brake calipers.
The goal here is to put the pistons through one final cleaning process and then assess their restored condition to determine whether they can be reused or be replaced with brand new hydraulic pistons.

https://i.postimg.cc/Mph2qvG8/1_All_Brake_Hydraulic_Pistons_2_(Before_Polishing).jpg
(Above) The current condition of all the hydraulic pistons after undergoing a deep cleaning and de-rusting cycle in the ultrasonic cleaning machine.
Before beginning the restoration work, I took a closer look at several areas of the pistons that still required additional cleaning.
https://i.postimg.cc/P5BsTPqs/2_close_Up_Of_existing_rust_inside_pistons.jpg
(Above) Rust deposits still remaining inside the inner barrel of the hydraulic pistons.
(Below) Some staining or contamination present on the outer surface of the pistons.
https://i.postimg.cc/9Qv5Crfh/2_Staining_or_marking_on_outer_surfaces_of_both_front_and_rear_pistons.jpg
Grinding Process
To tackle the remaining rust deposits first, I attached a small brass wire brush bit to my Dremel and carefully began grinding away the corrosion. This method proved to be very effective at removing the rust while leaving the underlying metal clean and shiny.
https://i.postimg.cc/NjWqB50F/3_After_wire_wheeling_inner_barrels_of_all_brake_pistons_1.jpg
(Above) Nearly all of the rust deposits have now been removed from the inner barrel surfaces, revealing clean metal underneath.
https://i.postimg.cc/Mph2qvG7/3_After_wire_wheeling_inner_barrels_of_Front_brake_pistons_1.jpg
(Above) The front brake caliper pistons came out looking great, with all rust removed. Only a couple of pistons still show minor pitting at the bottom of the inner barrel.
(Below) The rear caliper pistons actually turned out even better than the fronts after the grinding process.
https://i.postimg.cc/fbm4LD3V/3_After_wire_wheeling_inner_barrels_of_Rear_brake_pistons_1.jpg
I’m very happy with how well the wire brushing process worked. The pistons have cleaned up so nicely that I’m now unsure whether I should paint the inner barrels or simply leave them as they are.
What do you guys think — should I paint them or leave them bare?
Polishing Process
Next, I moved on to removing the staining or contamination that remained on the outer surfaces of the pistons.
To do this, I set up my electric drill in a bench vice and attached a cone-shaped polishing wheel. This created a simple DIY polishing rig that made the process much easier to control.
https://i.postimg.cc/wBLKvgtt/4_Polishing_Setup.jpg
(Above) With this setup I can safely hold the piston while polishing, without having to manage both the drill and the part at the same time. This gives me much better control and allows me to polish the piston surfaces more effectively.
Here’s the starting condition before polishing the first piston.
https://i.postimg.cc/bvkXJpGg/4_Test_of_polishing_process_on_outer_surface_of_Brake_Piston_(Before).jpg
(Above) It’s a little difficult to see in the photo, but there is a thin ring of staining along the upper section of the piston’s outer barrel. The goal is to remove as much of this contamination as possible using the polishing process.
After about five minutes of polishing, the results were impressive. All of the staining on the outer barrel of the first piston was completely removed.
https://i.postimg.cc/SKC0skXM/4_Test_of_polishing_process_on_outer_surface_of_Brake_Piston_(After_1).jpg
https://i.postimg.cc/zfKmB8Lw/4_Test_of_polishing_process_on_outer_surface_of_Brake_Piston_(After_2).jpg
(Above) As you can see, the contamination that was present on the piston surface has now been completely removed.
All that remained was to repeat the process on the rest of the pistons. Just like the first one, the results were excellent. The polishing process removed all visible contamination from the outer surfaces, making the pistons look almost brand new again.
https://i.postimg.cc/q7yfR4t1/5_All_Pistons_Polished.jpg
(Above) The polishing process was quick, simple, and extremely effective. I’m very happy with the results so far.
After successfully removing the rust deposits from the inner barrels of all the pistons and eliminating the contamination on the outer barrel surfaces, I am satisfied that these restored brake caliper hydraulic pistons are suitable for reuse. They can now be reinstalled into the front and rear brake calipers during the final stages of the restoration process.

By DJ_Party_Favor · 24 minutes ago24 min
ADAMZX's OEM+ 2000spec Version R Replica Conversion & Rebuild Project Build Thread

This month I wasn’t able to dedicate as much time to the project as I had hoped, but I still managed to make some progress. The focus was on cleaning up and polishing the hydraulic pistons in both the front and rear brake calipers.
These components still had varying amounts of residue and rust buildup left over from the earlier cleaning and de-rusting process, so this stage involved carefully removing the remaining contamination and improving their overall finish.
YouTube Channel: https://www.youtube.com/@ADAMZX Instagram: instagram.com/adamzx_z32

By DJ_Party_Favor · 28 minutes ago28 min
OEM Brake calipers - aluminium vs cast iron

As per the "what did you do" thread I had to source a pair of replacement front calipers today, as mine have seized on the lower inner piston on both sides.
After searching the 'net, I found a couple suppliers had them in stock. First being Torquen - albeit at over £600 for a pair for either cast iron or aluminium.. Then I found some fully rebuilt aluminium ones (the correct fitting for a TT) at less than half that, which got me thinking. Cast iron vs aluminium....??
Both seem to have their merits and drawbacks - the ali ones being much lighter, so less unsprung weight - whereas the iron ones allegedly handle the heat better, reducing the chance of disc warpage. If one believes everything one reads on the interweb LOL!
Seeing as I don't track the Zed - and I am happy with the OEM set-up, when it works properly, plus I have a set of Brembo discs waiting to go on, as opposed to the Ebay ones I had previously, I thought the ali calipers would suffice.
Opinions please - good or bad😁

By RichardS · Thursday at 21:352 days
What did you do to your zed today?

Took mine to the garage today, to have new front discs and pads fitted - as the replacement discs I got fitted a year ago have also warped.
This time, it was obvious that both calipers had seized - lower inner piston on each side! Naturally, they didn't bother fitting the new kit for me, as those discs would also go bad pretty quickly. Not to mention the pads would never squeeze in past the protruding pistons!
So a quick search for some new or rebuilt calipers on the web ensued, and hopefully they will arrive on Tuesday - as the garage has rebooked me in on Friday 20th. Just in time for my next road trip😉

By RichardS · Thursday at 21:222 days
A sad thread

Wow - it doesn't seem that long......

By RichardS · Thursday at 20:162 days

Movie sharing

Top Posters In This Topic

Popular Days

Featured Replies

Join the conversation

Recently Browsing 0

Top Posters In This Topic

Popular Days

Recently Browsing 0

Popular Posts

ADAMZX's OEM+ 2000spec Version R Replica Conversion & Rebuild Project Build Thread

ADAMZX's OEM+ 2000spec Version R Replica Conversion & Rebuild Project Build Thread

OEM Brake calipers - aluminium vs cast iron

What did you do to your zed today?

A sad thread

Important Information

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)