Guest warrior Posted October 21, 2005 Posted October 21, 2005 Hi Had trouble with high idling so checked tps connection and voltage which was ok but found ecu(water temp sensor plug was so badly corroded that i had to change it. Now i have complete opposite, idle is fine at 800rpm but keeps dropping down to about 100rpm for a couple of secs rises for a few secs then drops again. Any of you clever people got any ideas Quote
Clarkey Posted October 21, 2005 Posted October 21, 2005 sounds like the base idle is set too low, adjust the screw on the valve (right rear of the plenum) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.