hi i havw a 300zx none turbo jap import on a 92 the speedo is in kph i have removed the whole set of clocks if i put another set in that show mph will they work ok just by reconecting with the mulit plugs i have taken off the old ones and hes asking 275 for the clocks is this a bit steep hope u can help me and will it take off that bell when i go over 105 kph yep1062@hotmail.com

yes, although you can get a MPH convertor for about £30 to install onto your KPH clocks..or a set of UK clocks (in mph) for about £100.

 

It wont remove the bell..but thats very easy to do by cutting a single wire

see instructions here : http://www.neuralmotion.com/forum/tech/Alarm.htm

great news where would i get the 30 pound mph converter looked all over the net for one and thank i will work on the bell

Best way in my opinion is to get a set of UK clocks which as Legrath said should set you back about £100 and is a pretty easy job to swap over, if you get some Jspec clocks that have had a different resistor soldered in they will also work or a set of Jspec clocks with the little black box still attached that alters the speedo reading will do it.

i have added u to my messenger hope u dont mind

Zcentre sale them (bottom right corner) http://www.zcentre.co.uk/performance/perf2/performance2.htm , but they were popping up on ebay all the time a few months back, not checked since though.

Or buy the converrter and fit it, I think someone said before that the zcentre sells them, if not I am sure I have seen them on ebay before now.

best bet is UK clocks and a wire removal .........i have had two speedo delimiters

and they have both gone bad ....total cost about 60 quid a throw 120 quid ..i have now got some clocks waiting for me thanks to Mickey B for holding on to them

thanks dont no what u mean by wire removal