I'm about to receive jdm front clip TT :hyper:

were i live the driver side is left and it's legal to switch to the right

so guess what. :D

 

I know u can do that with some cars cause there is only 1 frame for both driver side. So i'd like to know if the Zed is build that way.

 

(O yeah, a won't cut my Z in half and weld the front jdm with my american back hehe)

 

Is there any thing i should know about before removing the dashboard

 

Any information would be appreciated. :)

 

Sorry for my english, i'm a french canadian.

Do you know how to take the dash off?

 

From what I remember there are.

 

2 under each side of the control pods (The light switches and air con control) You have to take these off first. behind them there are 1 screw each side you need to take off.

 

2 screws which hold the top of the dash on. You can get these from just infront of the actual dash.

 

You have to unscrew the panel under the steering column. 3 screws if I remember correctly. 2 are easy to see, and the 3rd open the driver door, and pull off the vent where the door meets the dash. Behind there is another screw. That bottom panel should move down slightly.

 

When you took the top cover off the dash you will see 2 screws right above the dash which olds on the plastic surrounding. After you have taken those 2 off the plastic surrounding sould come off. Pull it towards you and downwards a little.

 

You can now see the dash. I think the only things holding it in now will be 2 screws at the bottom left and right of the dash. Unscrew those and the dash will come out. Dont pull it too hard as you have to get you hand around the back and unclip the wires.

 

This is the best I can remember how to do it.

 

Hope it helps.

thx for the help SRRAE

:D