Hi can anyone tell me if you can get a seal kit for p/s pump as mine is leaking from the back,there is no play in the pullie and the pump is pumping , or is it a case of a new pump if so how much and where is best place to get it cheers Paul :duffer:

Hi can anyone tell me if you can get a seal kit for p/s pump as mine is leaking from the back,there is no play in the pullie and the pump is pumping , or is it a case of a new pump if so how much and where is best place to get it cheers Paul :duffer:

 

 

you can sort it remove P.S pump at back of pump remove 4 bolts remove cover and there is a gasket replace gasket if you want you can smear a small sealent for a perfect seal.Whilst your at it you may aswell replace copper washer and o-ring to pump remove flexi hose on side of pump replace both copper washers either side of banjo bolt job done refit.

 

could ask ryan@z tech if he can source you a new gasket

 

replacement parts

rear PS pump gasket

x2copper washers

 

HTH greg

I just replaced the front bearing and 4 o rings in my pump.I got all the parts from a local bearing place for less than $10.I didn't replace the gaskets but used Locktite Blue on all mating surfaces.Its a pig to get the pump in and out.After taking out the pivot bolt its still a very tight fit and needs levering out.Took me about 6 hours just to get it out!

I just replaced the front bearing and 4 o rings in my pump.I got all the parts from a local bearing place for less than $10.I didn't replace the gaskets but used Locktite Blue on all mating surfaces.Its a pig to get the pump in and out.After taking out the pivot bolt its still a very tight fit and needs levering out.Took me about 6 hours just to get it out!

 

blimey but then next time you do it should take 1hr :cool:

thanks ill set aside a weekend then lol

you can sort it remove P.S pump at back of pump remove 4 bolts remove cover and there is a gasket replace gasket if you want you can smear a small sealent for a perfect seal.Whilst your at it you may aswell replace copper washer and o-ring to pump remove flexi hose on side of pump replace both copper washers either side of banjo bolt job done refit.

 

could ask ryan@z tech if he can source you a new gasket

 

replacement parts

rear PS pump gasket

x2copper washers

 

HTH greg

cheers mate that would be great thanks ozy.tt@tiscali.co.uk

you can sort it remove P.S pump at back of pump remove 4 bolts remove cover and there is a gasket replace gasket if you want you can smear a small sealent for a perfect seal.Whilst your at it you may aswell replace copper washer and o-ring to pump remove flexi hose on side of pump replace both copper washers either side of banjo bolt job done refit.

 

could ask ryan@z tech if he can source you a new gasket

 

replacement parts

rear PS pump gasket

x2copper washers

 

HTH greg

how do you get hold of this chap

how do you get hold of this chap

 

Check out the Ztech section in the Traders area...or visit website at http://www.ztech.co.uk