This 6 pot dashpod is now available at £95.00 plus vat.It comes in the black crinkle finish on the top to match the speedo/rev clock hood and black smooth finish on the front face to match the surround of the speedo rev clocks.

The bottom row allows 3x 52 mm gauges.The top right is for a 52mm gauge,top middle 60mm gauge and top left for 60,63 or maybe 80mm gauge (depends on size of bezel).

One of the pics shows it in white but they come as described above in black ready to be fitted.

Any questions then please reply on this thread.

Cheers Luke

I'm liking that dash pod mate. Nice one! :)

Hopefully I'll get a chance to see it in the flesh soon as I've very nearly finished sorting out the bits and pieces my end...;)

I like it, but why the different sizes at the top?

Nackers. Have 6 52mm and a VDU to put in. Oh well. Have to come up with another plan.

I like it, but why the different sizes at the top?

 

Because thats how version 1 is.You can still use 6 x 52mm gauges in version 1.Version 2(available soon) will have the top left hole smaller so you can have 3x52mm max on bottom row,top right 52mm max,top middle 52 or 60 mm and top left 52,60,or 63 mm.The holes will be cut to your order.

Luke.

Nackers. Have 6 52mm and a VDU to put in. Oh well. Have to come up with another plan.

 

I have shown version 1.Version 2 is explained elsewhere in this thread.Version 3 will have the bottom row as a FLAT FACE (about din size) so you can have a 52/60 mm gauge and a 1/2 din size unit (boost controller etc) or keep it a din size for other applications etc.

Luke.

wow nice piece of kit, if a little bit supra-esque...

wow nice piece of kit, if a little bit supra-esque...

 

My first thought as well. Tis nice though!.

Nackers. Have 6 52mm and a VDU to put in. Oh well. Have to come up with another plan.

 

Adding to my previous reply you can also use the piller pods that i sell £50.00 + vat or the door card plate single 52mm £15.00 + vat or the radio slot 2/3 52mm gauge plate £25.00 + vat.These are ALL on my web site.

Unlike some other traders on the forum i don't have the time to log on EVERYDAY to make you guys aware what i sell.Best for you guys to ring me before you buy anything as not all my products are on my web site and in most cases cheaper than elsewhere eg blitz,apex,act clutches etc.

Luke.

Luke, am I reading correctly? :slap: Can you supply that dash pod, and I can fit 6 52mm gauges in it??

If so, Im up for this. :hyper:

Will be ringing you later today ref "the other matter" ;)

Luke, am I reading correctly? :slap: Can you supply that dash pod, and I can fit 6 52mm gauges in it??

If so, Im up for this. :hyper:

Will be ringing you later today ref "the other matter" ;)

 

Hi neil,

Yes you can fit 6 52mm gauges in version 1 but version 2 will have the largest hole(top left) made smaller so it will look better with 6 52mm gauges.

Hear from you soon.

Luke.

Very nice pods Luke, can't wait to see a few guys with em fitted and loads of gauges.

btw you seem to have performed somewhat of a miracle, this post is duplicated with identicle timings in your own traders area :p

cheers

smithy

Very nice pods Luke, can't wait to see a few guys with em fitted and loads of gauges.

btw you seem to have performed somewhat of a miracle, this post is duplicated with identicle timings in your own traders area :p

cheers

smithy

 

Hi paul,

Thanks for the input.Miracles don't seem to be a problem at the moment.Another miracle might be the 6 pot dashpod LHD.Try to not get to over excited.

Luke.

Looks pretty neat Luke, will be good to see in the flesh with some nice gauges in and painted up :)