Hicas light??

March 29, 200520 yr

Hello all.

Driving around a minute ago i looked down and noticed that the hicas light on the dash was on. Now i know this may be a stupid question but what does this mean because i have never seen this light before as my boost gauge sits directly in front of it and only saw it coz i leant forwards. I have had no probs with the steering and the car handles fine. Advice would be most appreciated.

Thanks

BensJammin

Quote

March 29, 200520 yr

Hello all.

Driving around a minute ago i looked down and noticed that the hicas light on the dash was on. Now i know this may be a stupid question but what does this mean because i have never seen this light before as my boost gauge sits directly in front of it and only saw it coz i leant forwards. I have had no probs with the steering and the car handles fine. Advice would be most appreciated.

Thanks

BensJammin

Normally means you will need a power steering top up.

usually you get a bit of heavier steering with it..

Quote

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.

Reply to this topic...

https://www.300zx-owners.club/forums/topic/41025-hicas-light/

Followers

Go to topic listing

No registered users viewing this page.

No registered users viewing this page.

JaiKai - MK2 - Ziggy Build

Moving on to the air conditioning.
This felt like it took me an age to get the pipe work back in, never seen such a complicated setup of pipes.
think i've managed to get them all in place however i've discovered that the aircon evaporator is bent and i cant get it to bolt back in on one side.

I'm now looking out for options to retrofit a newer aircon system.

By JaiKai · 6 hours ago6 hr
JaiKai - MK2 - Ziggy Build

Fitted the donor Power Steering pipe work today, after i gave it a good scrub to clean it :

By JaiKai · 6 hours ago6 hr
Tyre size recommendations

I have some after market wheels on my Zed and all the tyres have perished so before it goes for its MOT at the end of the month im looking for new tyres.
The wheels are 17" and are staggered, with a 9.5j at the rear and 8j at the front.
The current tyres on the rear are 255/40/17 and a 235/40/17 on the front.

Now ive only been able to find one tyre at 235/40/17 so I want to change so I can get a decent brand, but which way do I go.
I dont want stretched look, I want a nice flat side wall look so thinking of a 245, but would this be too chunky.
The other question is if I go up a size on the front, should I also then go up on the back? Or will it not matter?
Any help would be gratefully received!

By RobHowl · 10 hours ago10 hr
MOT time again

Last year went by very quick, my zed was also due this month, it's first MOT in my ownership.
Thankfully passed, slight oil leak as well (I have been keeping an eye on). Unfortunately some corrosion underneath too which will need sorting.
Hoping to make the trip down to Powerzed in the near future to get the car checked properly and prepped for a good year of driving and enjoying the beast.

By Mohsman · Monday at 22:572 days
Suggestions for Potential Valved Exhaust

Hi everyone just a quick question on valved exhausts.
I had one on my golf R and it was a game changer that allowed me to have a bit of fun when on a decent drive by myself, but reign it in when I have more reserved passengers or driving in places where I don't want to be a dick and ruin peoples day.
So was just wondering if anyone has much experience of getting these for the 1992 Z32 TT platform?
Aware there probably isn't an off the shelf option, but potentially any trusted fabricators who do good work in this area? I know Jim at PowerZed trusts the team in the unit by him to do a lot of exhaust work so they were my initial first thought, but may as well open up the question just in case there are some other great options out there too.
Long term intent as I get other work done will likely result in an aftermarket ECU so that could solve the issue of valve control, otherwise potentially a bluetooth controller would work I assume for simple open/close.
Thanks all

Adam

By Cwn_Annwn · Monday at 09:082 days

Sign In

Hicas light??

Featured Replies

Join the conversation

Recently Browsing 0

Recently Browsing 0

Popular Posts

JaiKai - MK2 - Ziggy Build

JaiKai - MK2 - Ziggy Build

Tyre size recommendations

MOT time again

Suggestions for Potential Valved Exhaust

Important Information

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)