Well some of you know me and Chunk took Zelda for her first Dyno today and here is the chart, Wheels spinning and 2 men in the boot :rofl:

Got 290.5 RWHP = 348.6 FWHP at 6000 Rpm + 296.5 Lb/ft torque

As the wheels where spinning i am now looking at taking her to Thor to get her done properly :D Dont know when yet will have to ring them :cool:

Very well done mate :bow: :bow: :bow:

Looks like a nice smooth curve too - good one mate.

:D Cheers guys didnt know what to expect :x: but chunk had a laugh at me worrying....:rofl: :xxx:..LMAO

Nice one Matt, what boost were you running?

Still the same chip?

So glad she didnt go BANG!

Nice one Matt, what boost were you running?

Still the same chip?

Hi John.

Yes mate same chip you fitted :D dont know how agressive that is :confused:

Boost was set at 14.5 but he only took the revs to 6500, but peake said 15.5 when we looked afterwards :confused so dont know the answer mate unless it was 15.5 then i would of expected more me thinks.. :mad: :D

you got a good setup there mate, id be interested to see what the result at thor will be when there would be no wheelsping.

 

nice one

Hi John.

Yes mate same chip you fitted :D dont know how agressive that is :confused:

Boost was set at 14.5 but he only took the revs to 6500, but peake said 15.5 when we looked afterwards :confused so dont know the answer mate unless it was 15.5 then i would of expected more me thinks.. :mad: :D

 

Boost does die off at high revs, and you'd already made peak power, so not much point revving it past there anyway. You'd probably have just run out of injector. That chip's sort of middle aggressive.

Torque drops off quite quickly, which might suggest you're controller setup isn't ideal. Hard to know without being there.

Well the Chunk man set the B/Controller before we went in :x: as you know i dont know that much about the controller yet John :( but am all ways open to suggestions :D

Well the Chunk man set the B/Controller before we went in :x: as you know i dont know that much about the controller yet John :( but am all ways open to suggestions :D

 

 

Nice one Sgt C,let us know when you go to Thor,will pop over to look,by the way they will set up the controller to perform best(what make is it) an SAFC II and Power Boost FSE Fuel Regulator with the boost sorted will give loads more Torgue and increase in BHP,did on my old Z anyways,see ya sdunday,Tony :cool:

:D Cheers Tony,

I have a Profec BII controller mate, i was toying with the idea of a FSE fuel Reg as i have had them on my other cars ;)

Cya Sun bud for a chat :D