Guys,

 

I am in need of the measuremnts for the centre nut on these MX5 alloys as I have similar ones on my Zed, they are just much bigger.

 

I am missing one of the centre nuts though and am sure they are the same size as the MX5's.

 

If anyone has a MX5 with these alloys could they please tell me the measurements?

 

A long shot on a Zed forum I guess but I have tried the MX5 forums and they are crap. Everyone should buys zeds just for an excuse to use this forum!

 

Cheers,

 

Justin

Are`nt they the same as a bmw (old 5 & 7 series) cross spoke alloys. Ive got some in the garage. I`ll measure them tomorrow if you want. No light in my garage a the mo.

 

cheerz,mickey

Cheers Mickey,

 

 

That woud be great if you could:)

 

Justin

Ok just been out to garage with a torch to measure up. they are 6.5 inches across and the centre bit that holds on to the wheel is about 3 inches across. hope this helps.

 

cheerz,mickey

Top Man,

 

I will go and measure mine up (the centre caps before anyone comes up with any wise alec comments!!!) and see if they are the same.

 

Thanks for that Mickey, much appreciated:)

 

Justin

Mickey,

 

Just measured up and my centre nut is just over 3 1/2 inces so it looks like a no go with BMW caps:(

 

Thanks for the hekp anyway mate.

 

Justin

I measured the other side of the nut, the prong things. Bmw wheels have a larger centre bore and the pcd is 120mm, almost 6mm bigger. I will measure the nut on the outside tonight when i get home from work. I`m pretty sure they are the same caps as bm cross spoke are bbs wheels.

 

cheerz,mickey

Thanks Mickey,

 

Its the measurements of decorative centre nut bit I am after.

 

Will be interesting to see what you come back with.

 

Justin