Having just finished fitting my SBC ID & Power meter id I have hit a problem, the set up and operation instruction are all in Japanese!! any one know to a link to download or view set up instruction for both of these as yet they look erm nice but do not a fat deal..at all?

 

Jefff TT

Can't help on set up but would love to see a photo of where you have put them, thinking of doing the same myself with both units!!

 

Cheers

 

Andrew

hi jeff try here

http://www.alltrac.net/manuals/

http://www.rs-competition.ru/texpodderjka/Blitz%20SBC%20i-D%20manual.pdf

i will have one soon any tips on fiting one

all the best sid :D

 

 

 

 

-----------------------------------

there you go;)

 

http://www.mkiv.com/techarticles/blitz_sbc_id/index.html

 

I have instructions for the ID Meter and the SBC If you need them.

Thanks guys very helpful all, attached a pic of completed install in car will take a few pics under bonnet tomorrow.

 

If I could pass on a tip then it`s take your time when doing the pipework under the bonnet, in my eagerness to get it done I passed the cable`s and pipes the wrong way so many times I actually pulled them out had a tea break and started again.

 

Also concerning the problem with getting pipes and cables from in the cabin to the engine bay I prised off the blanking plate off the bulhead where if it was a manual the clutch master cylinder would go.

 

I drilled a couple of 20 mm holes in it and fixed rubber grommets in it and then used black silicon sealant to fix it back on and left it for a few hours, nice to be able to easily pass cables and pipes through and also have room to spare for any future mods. Fitted a rubber shroud over the rear to keep out any noise etc.

 

Jeff TT

 

Ps Mac have you a link for the set up on the speed meter or have you the actual instructions? do you have a fax?