How easy is it to remove the plem and what are the side effects ?

I may need to change an injector.

Well spotted Chris!!!! Anyone got the part no's then? If not I'll look them up :)

 

Stu - with the correct chip, the fuelling will be exactly the same on 555s. They just give more capacity for higher boost levels...

 

CheerZ,

 

Andy

And rougher tickover and running at low revs due to the fine control of low volume fuel delivery being compromised.

 

 

Originally posted by andyduff

Well spotted Chris!!!! Anyone got the part no's then? If not I'll look them up :)

 

Stu - with the correct chip, the fuelling will be exactly the same on 555s. They just give more capacity for higher boost levels...

 

CheerZ,

 

Andy

Andy, that isn't necessarily the case - people have been know to get as good as stock idle with 850s so..... (I know cos John Dixon told me - he could be lying though :D:D:D)

Just phoned SE to see if and when thye could do the work. They said 3 months Fook that !!!!.

Originally posted by smw1

Just phoned SE to see if and when thye could do the work. They said 3 months Fook that !!!!.

 

Phone me! Phone me! :D:D 07801 735117 ;)

 

CheerZ,

 

Andy

Originally posted by AndyP

And rougher tickover and running at low revs due to the fine control of low volume fuel delivery being compromised.

 

Got to agree with Andy Duff on this one, my engine runs better than ever with 555's. If you know of anyone with a rough idle after even breathing on the injectors, then it must be dirty connectors.

It's not really a hard job as all that. Do it yourself. I have done it 5 times in last 6 weeks and still having problems with injctors. I can now do it with eyes shut so if you need some advise i'm here to help.