Jump to content
View in the app

A better way to browse. Learn more.
300ZX Owners Club

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

ABS fault

My ABS light is on constantly, ran through the diagnostics in the service manual and it seems fine except the power to the control unit.

With the ignition on, pin 1 should get battery voltage, but I'm only getting about 6V. I measured the battery voltage as 12.5V.

Anyone got any ideas what could cause that?

  • Quote

    • Featured Replies

    • Author

    Gaz, Ah is that a thing? Could be the connector to the reservoir, I changed the master cylinder earlier in the year

     

    Andrew, was pin 1 to ground. I tried a few different points near the control unit, got about the same for all. Will try again though

     

    Sent from my SM-N950F using Tapatalk

     

     

     

     

  • Quote
    • Author

    Ah, the 6v must have been a ground loop....the fuse had blown, I didn't realise it was fed by the 'eps/hicas' fuse in the footwell, I thought it was under the bonnet. Guess that's for the actuator.

    Thanks for the replies anyway!

    Sent from my SM-N950F using Tapatalk

  • Quote
    • Like 1

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
    Reply to this topic...
    https://www.300zx-owners.club/forums/topic/159881-abs-fault/
    Go to topic listing

    Recently Browsing 0

    • No registered users viewing this page.

    Important Information

    Terms of Use

    I accept

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.