I'm looking at changing my wheels over on the 300.

 

There's two sets I like the look of, one is:

 

Front 8x18 et45

Rear 9x18 et38

 

The second set is:

 

Front 8x18 et40

Rear 9x18 et42

 

Are either of the above a decent fit? I'm on stock suspension with brembos up front. If they aren't what offsets should I be keeping my eye out for?

 

Thanks in advance for your help

Et38 on 9J will probably be ok on the rears but doubt you'll have to roll your arches

 

Both those options for front off set will sit like stock wheels, if not further in the arches (can't remember what the offset is of the stock wheels)

 

On those width wheels I can't really advise what offset would give the desired stance that most look for. I can only tell you that a 18x9.5j et22 is bang on for the fronts. Can't really comment on the rears, as I'm on a 10.5J et30 and had to flare the arches a fair bit for them to fit, but have zero clearance issues on the inside of the wheels

 

Funkysi of JoelyP are two examples of spot on off set selection (I'm sure there's others but user names aren't coming to mind)