I made this as I think the 1uzfe needs a power boost and all the kits for sale cost 3k+

 

This is just a rough draft to get everything positioned, the next one will be 10mm lower ( currently 34mm taller than a standard plenum) and required less welding and the parts will be cut from entire sections rather than pieced together with bits I had sitting :)

 

 

I also have a ZF gearbox from an e36 m3 / 328i that getting an adapter made to manualise the adapter on the cheap. I already do the z33 box to 1uzfe but the z33 box is hard to get an a bot too expensive.

Is that the Lexus engine.....?

Yup, the 1uzfe from soarers and ls400 etc

I have also got a second idler pulley added for more belt wrap.

I have done the calculations and it should push between 7-10psi (I worked it out at 10 psi with that size pulley but so many factors can affect it) which should give 380-430 bhp with a proper map.