Does anyone know were i can get intercooler pipework at 2.5inch 57mm to maybe 3 inch 75mm or using the later maybe ott oh and the two inch expantions aswell. anyone on here used three inch by chance.

Is that alloy tube or silicone?

alloy tube and bits of silicone or even stainless steel

Use 2.5 alloy tube from eBay the use silicone reducers loads of pipe work on eBay, don't use stainless for intercooler pipes

i want to change all my fmic pipe work for larger and then maybe other air charge intake pipe

ive just realized i made a bobo i already have 2.5 pipe work so i was looking at 3 inch pipe and yes alloy not stanlees thanks

So you have uprated intercoolers and pipe work ?

can you get 3 inch thou?

think you're loosing sight of the goal. If all your ic piping is 2.5" (doubt if it's front mount), then next port of call will be the throttle bodies and plenum

got to measure my pipework when i get home .i work away but home this week, thursday so ill measure it friday. i do have fmic so ill measure that, then throttle bodies and plenum.? but what size are the throttle boddy pipe-work. basically i just want to go up a size to the next. so what would that be? and is this easy to get hold of.if not i have a mate who can bend me some pipe. thou not sure if he can bend alloy ,have to aske. i just might buy a plenum of ebay or on here so i can have a play.I want to get the pipework up a size before the remap and chip next year.

3 inch mandrel bent alloy pipe is VERY expensive, tbh by the time you bought enough pipe to do your car you could have upgraded something much more worthwhile

stanlees steel then it is