i have rung round every one no one had any i found one but when it came it was a mirror image of the one i had so pipe were on the wrong side the guy at the supplier had no item why this was can some one please tell me were to buy one

MJP for all Standard Parts. (You will find his details in the forum traders section).

 

Although you can get Master cylinder repair kits instead. MJP probably does them too.

thanks ok here is what i found out all the patten part master brake cylinders are all left hand drive and a new nissain one is near £200

As Yowser said, just buy a repair kit for yours, its unlikely the housing etc is at fault.

Yes, I'd be interested in a price for that repair kit too...

thanks ok here is what i found out all the patten part master brake cylinders are all left hand drive and a new nissain one is near £200

 

Just like the early Zeds the whole pattern part business is driven by the American market as the UK market is too small.

So when an item is handed it invariably is for a LHD car.

Its no big deal using a LHD BMC. Just need a bit of new pipe.

The price difference is too great to ignore

 

As Yowser said, just buy a repair kit for yours, its unlikely the housing etc is at fault.

 

It could well be IMO. After all it might be 20+ years old.

I personally wouldnt re seal any BMC that old, especially on a 300BHP supercar.

Given that the reseal kit is probably not cheap anyway and you have all the job of fitting the kit then £120 to me seems not unreasonable given that brake failure will cost considerably more.

All of course IMO

i put new seals in still faulty . having had a good think am fitting a brand new nissan one now i have spent a fair bit on uprated discs and pad so for safety a new nissan part it is