Can I change engine mounts if the engine is still in the car ? Is if enough space to change them if I just lift engind a bit ? Is if enough room to undo the bolts?

Thanks.

yes u can do it ... but you will have to drop the alternator to gain access to the upper bolt on that side

 

lift the engine from above or jack it up on the bell housing of the gear box .. Not the Sump !

drop the subframe down a little by undoing the bolts by about 1/2" .. this should give u enuff space to pull them out once bolts are off

yes u can do it ... but you will have to drop the alternator to gain access to the upper bolt on that side

 

lift the engine from above or jack it up on the bell housing of the gear box .. Not the Sump !

drop the subframe down a little by undoing the bolts by about 1/2" .. this should give u enuff space to pull them out once bolts are off

 

Now I am strugling to get passanger side off. I took alternator off but still cant reach a bolt its too tight and not enaught room to turn

Passenger side will be the AC pump there ... u can gain access from top or bottom ... you gonna have to keep trying m8

Passenger side will be the AC pump there ... u can gain access from top or bottom ... you gonna have to keep trying m8

 

Ohh sorry I mixed thing i cant undo driver side one. Alternator is removed but still cant get do change lol

not sure why u can not get to that one .. thats the easy one ...