I have just dropped a TT lump in my car and gone to bolt up the original N/A pump to the mounting that came with the engine and it doesn't fit.......?

The N/A pump is too wide to sit in the gap where it bolts up to.....

 

I have also been trying to fit the hard pipes for the intercooler and want to know if they go through the small gap either side where the anti roll bolts on?

They don't seem to fit the gap??

Do I really need to drop the front mounts to slide them through?

 

To top it off I opened the bonnet to be confronted with all the lovely chrome gone rusty......... Not happy now.......

 

Need some help........

 

Thanks

Russ

Edited June 11, 201312 yr by veilside01702

You need to swap the na bracket over

You need to swap the na bracket over

Time to go through the boxes and pray I didn't just bin it with a load of bits last week...........dohhhh

Thanks Baz..... I didn't think they would be different....lol

Sure I have an NA bracket in the garage if you get stuck.

Hi Baz and Olliezx, I managed to find the bracket after an hour or so searching boxes, then spent another hour looking for the long bolt then another 30 mins looking for the adjuster bar......

Finally got it all together to find the pulley is a 3 rib belt and the main pulley is 4 rib.... I decided to use a 3 rib belt...... I hope it sits and runs okay.......lol

Is this normal?

The TT pump pulley I have is 4 rib, but not interchangeable with the N/A pump..... It is back to front and doesn't line up at all..... Is there a work around for this apart from fitting N/A bottom pulley????

Cheers

Russ

Does anyone know a way to fit the intercooler hard pipes?

As they won't fit through the gap?

Do I have to drop the antiroll bar mounts?

Or am I missing something simple?