Ok so the rear arches on my pulsar are going to be done in next week or so, I'd like to respray my car myself,

now I've done bits n bobs before, is solid black (kh3) an easy colour to spray?

 

Now ill be doing the front and rear bumpers first and see how they turn out before moving onto the rest

 

Has anyone got any tips or guides on how to get best results

 

Any help would be great please, and I know it would be easier to get someone to do it but just can't afford that option at the min

 

1: what grit paper is best to use for first stage

2:what grit paper for sanding primer

3:what grit for top coat

4: how to get a nice finish?

Ok so the rear arches on my pulsar are going to be done in next week or so, I'd like to respray my car myself,

now I've done bits n bobs before, is solid black (kh3) an easy colour to spray?

 

Now ill be doing the front and rear bumpers first and see how they turn out before moving onto the rest

 

Has anyone got any tips or guides on how to get best results

 

Any help would be great please, and I know it would be easier to get someone to do it but just can't afford that option at the min

 

1: what grit paper is best to use for first stage

2:what grit paper for sanding primer

3:what grit for top coat

4: how to get a nice finish?

 

Its still too early/cold for DIY painting without a heated booth.

Next month should be better.

1. Heat. 2. Clean dust free room.3. Big cfm compressor all needed. 4 Dont try water based stuff at home. so you will need a charcoal filter organic vapour twin mask as a minimum safety level.

Pop n have a cuppa and I will talk you thru it all. Pain. Paper. tips , technique etc etc.

Well im doing mine outside at the min and its almost 100% mint :wink:

Cheers Pete ill pop over one day over the weekend if that's ok? If not let me know when your free