Hi all

 

I need to remap my 300ZX TT.

What will be the best place to do it?

 

Regards

depends on if you want a remap or if you want to reprograme the chip

 

what is the intention ? usually remapping is done after extensive engine mods , new forged internals , bigger tubs , Injectors , intercoolers , radiators etc when a remap will get the best out of the set up on an individual basis using a roling road dyno it i susualy done on a seperate ECU , Emerald or AEM etc

 

chipping the ecu is what most do to get the best performance from stage 1 and 2 mods , intake, boost increase, exhaust and de cat

some people can "tune" the nissan origional ECU but most tend to buy an off the shelf generic Chip pre programmed , this needs the ECU mother board socketing and the new Chip installing.

 

plenty do the chips, DTA used to do them , Zedworld, etc can supply them, John Dixon can tune / map the origional ECU

 

good luck

 

Steve

depends on if you want a remap or if you want to reprograme the chip

 

what is the intention ? usually remapping is done after extensive engine mods , new forged internals , bigger tubs , Injectors , intercoolers , radiators etc when a remap will get the best out of the set up on an individual basis using a roling road dyno it i susualy done on a seperate ECU , Emerald or AEM etc

 

chipping the ecu is what most do to get the best performance from stage 1 and 2 mods , intake, boost increase, exhaust and de cat

some people can "tune" the nissan origional ECU but most tend to buy an off the shelf generic Chip pre programmed , this needs the ECU mother board socketing and the new Chip installing.

 

plenty do the chips, DTA used to do them , Zedworld, etc can supply them, John Dixon can tune / map the origional ECU

 

 

 

good luck

Steve

 

IVE SEEN this mans names brfore pop up . who is he and were is he in the country please. cas ive put new tubs on a large air air intake and a new large fmic, on top of that dont know how to use or set up my ebc that was fitted to me car before i bought it. and i dont want to bust my new tubs. and i also dont know whats been done to my car.?

Hi all

 

I need to remap my 300ZX TT.

What will be the best place to do it?

 

Regards

 

I see this is your first post bulletman why dont you put some details up in the newbies section with some pic's:cool3:

I see this is your first post bulletman why dont you put some details up in the newbies section with some pic's:cool3:

 

Ok, I will do that

depends on if you want a remap or if you want to reprograme the chip

 

what is the intention ? usually remapping is done after extensive engine mods , new forged internals , bigger tubs , Injectors , intercoolers , radiators etc when a remap will get the best out of the set up on an individual basis using a roling road dyno it i susualy done on a seperate ECU , Emerald or AEM etc

 

chipping the ecu is what most do to get the best performance from stage 1 and 2 mods , intake, boost increase, exhaust and de cat

some people can "tune" the nissan origional ECU but most tend to buy an off the shelf generic Chip pre programmed , this needs the ECU mother board socketing and the new Chip installing.

 

plenty do the chips, DTA used to do them , Zedworld, etc can supply them, John Dixon can tune / map the origional ECU

 

good luck

 

Steve

 

I know the diference between chip and remap.

I already have one chip stage 2 in my car, but with all the new mods I'm doing (bigger turbos, ebc, JWT cams, 740cc nismo injectors, dual intake, selin dual MAF translator, Fuel Pressure Regulator, 2.5" intercooler piping and nistune ecu (already have exhaust and decat, dump valve, turbo timer, fmic)) I need an remap.

Where can I find John Dixon?

I was looking "FC Tuning / Redline Motorsport Ltd", but I would like to listen more opinions

Email him here JohnDixon300 -At - hotmail.co.uk

 

He's from Kidderminster

Email him here JohnDixon300 -At - hotmail.co.uk

 

He's from Kidderminster

 

Thanks

Hi all

 

I need to remap my 300ZX TT.

What will be the best place to do it?

 

Regards

 

 

 

If your after someone in Portugal email me on jeff@zedworld.co.uk I have a couple of contacts there, I can let you have the full details.

 

Jeff

I know the diference between chip and remap.

I already have one chip stage 2 in my car, but with all the new mods I'm doing (bigger turbos, ebc, JWT cams, 740cc nismo injectors, dual intake, selin dual MAF translator, Fuel Pressure Regulator, 2.5" intercooler piping and nistune ecu (already have exhaust and decat, dump valve, turbo timer, fmic)) I need an remap.

Where can I find John Dixon?

I was looking "FC Tuning / Redline Motorsport Ltd", but I would like to listen more opinions

 

with the initial info you provided on your first post fella, "Hi all I need to remap my 300ZX TT. What will be the best place to do it?"

 

what kind of answer did you expect ? i was trying to be helpful , cover all bases etc and i do not appreciate your condecending and rude answer "I know the diference

between chip and remap" to a genuine attempt to be helpful

 

i know the difference good manners makes and a thanks for the reply Steve but............."I know the diference between chip and remap" might have stopped me feeling extremely hacked off at you right now .

 

good luck with getting what you want but a bit of tact and decorum goes a long way on this forum

with the initial info you provided on your first post fella, "Hi all I need to remap my 300ZX TT. What will be the best place to do it?"

 

what kind of answer did you expect ? i was trying to be helpful , cover all bases etc and i do not appreciate your condecending and rude answer "I know the diference

between chip and remap" to a genuine attempt to be helpful

 

i know the difference good manners makes and a thanks for the reply Steve but............."I know the diference between chip and remap" might have stopped me feeling extremely hacked off at you right now .

 

good luck with getting what you want but a bit of tact and decorum goes a long way on this forum

 

Hi Steve

I didn't to be rude with you, and I thanks also your try to help me.

Was you can see in my profile, I not english, and sometimes my words could not be the best to express my desires.

But, I kind of person, that before asking something, I will investigate first.

It's a lot of posts here, where talk about the diference between chip and remap, and I read all.

Don't be hacked off with me, please.

I'm new in this forum, and only thing I want here is to make friends, be helped and help somebody with my some experience.

One more time, sorry mate.

 

Regards

 

Mike