I want to put chip to my Ecu to run 555cc injectors but i got some extra microchips and I just want to know is that microchips is for my racelogic traction control or is just previews Remaped chip. there is a yellow wire from TC which goes to that microchip.

 

Does anyone have Race logic traction control or know what this microchip do ?

 

do you have an extra switch on the ecu somewhere is possible it has 2 different tunes on it one for road use and one for track. just a thought

do you have an extra switch on the ecu somewhere is possible it has 2 different tunes on it one for road use and one for track. just a thought

 

I dont have any other switch its may be related to Traction control but I am not sure. Its got yellow wire connected from tc plug.

I've got racelogic TC and it only connects to the ECU loom for the speed signals and the injectors.

 

It looks like your ECU has two maps installed, as said, you normally switch between them with a switch.

I've got racelogic TC and it only connects to the ECU loom for the speed signals and the injectors.

 

It looks like your ECU has two maps installed, as said, you normally switch between them with a switch.

 

but did you have those green blue yellow and red wires? there does the yellow wire goes?

but did you have those green blue yellow and red wires? there does the yellow wire goes?

 

No, none of the wires are connected inside the ECU only to the external loom. I'll have a look in the TC manual and get back to you tomorrow.

I know my car was chided or remapped so thats what a microchip is, may be is just a chip.

so now I can just easily remove this and replace with new chip ? but I still dont know where yellow wire goes

No, none of the wires are connected inside the ECU only to the external loom. I'll have a look in the TC manual and get back to you tomorrow.

 

I think my racelogic tc is a bit dated. I tryed to find the same one on internet. may be my one is just older version.

i think it would be best for you to get another ECU Mapped for 555 injectors

 

as both of them chips on the board will be for standard 370 injectors .. one Normal one aggressive

would like to try and Mix the two different chips IE 370/555

i think it would be best for you to get another ECU Mapped for 555 injectors

 

as both of them chips on the board will be for standard 370 injectors .. one Normal one aggressive

would like to try and Mix the two different chips IE 370/555

 

But i need 555cc chip just temperary to seeif everything works and than i do proper remap on dyno. I can get another ecu but whats is the point if i will not have my traction controller?

well contact Andy see what he can do with 555chip