March 27, 201213 yr I have an na shell with a tt engine in it. When I did the swap I used the na power steering pump. Now the pump is shagged, can I use a tt one? If so what do I do about the extra lines that go to the hicas? I'm doing this job tonight so any help would be greatly appreciated. Thanks - Alex :)
March 27, 201213 yr Simple answer is; Yes you can BUT you will need to get hold of a TT PS pot as well for the extra line and the TT pump uses a different fitting bracket. Unfortunately you can't just blank off the HICAS line from the TT pump as it will cause it to fail due to back pressure. Your best bet is to get hold of another NA pump.
March 27, 201213 yr Author Ahhh crap... Where can I get another NA pump? eBay seems to have nothing :(
March 27, 201213 yr Author have done, seems they are very hard to come by, took the pump off, and took it appart expecting to see something but it all seemed fine, hope it is the pump thats died, cant think what else it could be, it looks like a mirror image of the CA18det pump, so very nearly the same just the other way around, are they shared with any other car/engine? or did nissan genuinely make this 1 pump for this 1 engine variant..
I have an na shell with a tt engine in it.
When I did the swap I used the na power steering pump.
Now the pump is shagged, can I use a tt one?
If so what do I do about the extra lines that go to the hicas?
I'm doing this job tonight so any help would be greatly appreciated.
Thanks - Alex :)