Rear arms and hicas eliminater trial run :)

Followers

March 27, 201213 yr

Had a bit of time on my hands yesterday so decided to trial fit my rear suspension arms and Hicas eliminator to the subframe.Cant wait to get the bush kit etc for the hub carriers so I can build it up properly.Anyway,heres a few pics :)

Quote

March 27, 201213 yr

looks good. your well ahead of me :tt2:

Quote

March 27, 201213 yr

Are they Japspeed parts you have gone for? Whats the quality like on them

Marty

Quote

March 27, 201213 yr

Author

Are they Japspeed parts you have gone for? Whats the quality like on them

Marty

The lower and upper arms are from the Zcentre but look identical to my mates japspeed ones,were cheaper than japspeed.quality looks spot-on with a nice thick powdercoat and quality rosejoints etc.

Quote

March 27, 201213 yr

The lower and upper arms are from the Zcentre but look identical to my mates japspeed ones,were cheaper than japspeed.quality looks spot-on with a nice thick powdercoat and quality rosejoints etc.

It'll be interesting to see how the Zcentre kit holds up compared to DW and Japspeed. If a lot of R&D has gone into them and there's been no compromise in the quality of materials used during production and if the welds are good etc then they would appear to be a nice little investment (especially if they cost less which is fantastic news) however if they're just a cheaper out sourced poor clone of the other brands mentioned then genuinely, good luck mate

Quote

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.

Reply to this topic...

Followers

Go to topic listing

No registered users viewing this page.

No registered users viewing this page.

UK TT Manual Project

Well I thought things were going too well. The underside has come up well and is looking a whole load better now.
Turns out pre 2009 cars don’t need reverse lights to work to pass an MOT, so I can solve that problem another day. (Switch is working fine, but no signal getting to the rear)
New tyres delivered yesterday and I can just run them down the local fitting shop and have them fitted.
So I thought to myself, I’ll throw on the new pads and discs tonight, and she will be ready to go!
Then the brake pipe broke from the calliper and I had a sense of humour failure.

By RobHowl · 21 hours ago21 hr
Simply Japanese at Beaulieu 19th July 2026

I was just completing my booking but realised that it’s one of my daughter’s 16th birthday! I’ll check what she’s up to and see if I can get a pass! She may come with me, but doubtful. Will update as soon as I know.
Steve 😁

By cybernet · Yesterday at 00:001 day
Check engine light comes on and off sporadic.

Those codes are all pointing at a related issue. A/F ratio falling out of range, heater elements within the O2's out of temp range, EGR sensor or exhaust gas temp falling out of range, etc. There is a few areas to consider...
Was any work recently done to the car that may have triggered this? When was the last time you replaced the O2 sensors? Check the O2 connectors and wiring to make sure one of them hasn't contacted the exhaust or melted. Any exhaust leaks especially before the cats? When was the last time you performed an induction service and cleaned the intake, TBs, IAC, etc? The EGR and IACV love to get carbon buildup over the years and can affect flow, similarly can happen to the vac lines to the factory wastegate control solenoid. You mentioned the car felt like it was still running well, so no idle RPM fumbling, hanging, stumbling, etc? Are you running an aftermarket boost control solenoid or OEM? Sorry for the load of questions, but need a bit more to go off of to help point you in the right direction.
Even though the vehicle has considerable low mileage, it's still 30 years old. If it's kept in a garage it tends to handle the elements better than sitting out in the external environmental conditions and will need more routine maintenance and care regardless if it's being driven or not. (i.e. 60K / 120k maint w/ timing belt)

By protoj · Tuesday at 18:483 days
JaiKai - MK2 - Ziggy Build

Time to clean the AC parts as i found a birds nest in it.

By JaiKai · Tuesday at 12:043 days
Check engine light comes on and off sporadic.

Hello, I have a 1996 twin turbo manual with 64k miles. I recently started having the check engine light come on sometimes and other times it doesn't. When I checked the codes these are what I got : If anyone has had these same codes what did they change to fix the problem. Car runs fine with check engine light on but want to fix issue. Any help would be greatly appreciated. Thank you.
P0400
P0136
P1150
P1155

By JB300ZXTT · Monday at 22:143 days

Sign In

Rear arms and hicas eliminater trial run :)

Featured Replies

Join the conversation

Recently Browsing 0

Recently Browsing 0

Popular Posts

UK TT Manual Project

Simply Japanese at Beaulieu 19th July 2026

Check engine light comes on and off sporadic.

JaiKai - MK2 - Ziggy Build

Check engine light comes on and off sporadic.

Important Information

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)