I have a Blitz spec S EBC not Type R , the solenoids differ , i need to know what port i should connect the vac hoses to , the type S has 3 stabbings and no markings at all , the type R has two , in and out, i am unable to find detail on line so i am hoping somebody here may be able to assist

 

thanks

Sayers

a quick google and here you go ; http://www.blitzpowerusa.com/techsupport/pdf/dualsbc_specs-r.pdf

I am useing the single solinoid type Blitz EBC S and it works spot on,["did not use the twin sol.valve R"]. it locks onto the four adjustable settings it has been set at. I found it worked OK with the single solinoid valve using the standard 300ZX manual transmission Twin turbos installed using a Y connector and keeping the lines as short as possable and the same lengths to the Y fitting. The 4 adjustable boost settings are #1=8psi, #2=10psi,#3=12psi,and#4=14psi . Dyno results with some other mods with boost pressure set on #4 @ 14psi was 320 RWHP . Advise use a good boost guage.