I know it's screwed on but how do I get at the screws? I've removed all the nuts/bolts and screws I can see but it won't come apart :huh:

 

What am I missing?

I know it's screwed on but how do I get at the screws? I've removed all the nuts/bolts and screws I can see but it won't come apart :huh:

 

What am I missing?

 

Cant remember who but someone put a post up not so long ago that showed you had to drill into it somewhere to uncover the screws (not the top metal bit lol)

It's ok I forgot about robo's site, there's a how2 on that. :oops:

What 'moulding' are you talking about? Rose just had our targas completely apart to re-paint and re-furbish them recently and she didn't drill anything to my knowledge!?

What 'moulding' are you talking about? Rose just had our targas completely apart to re-paint and re-furbish them recently and she didn't drill anything to my knowledge!?

 

It's the weather strip mate on the outside. I took them off for my repsray but then noticed that they're screwed on from the inside. So when I "pulled" them off I broke most the clips. lol

 

Now that I've resprayed them I need to get them back on the proper way.

Interesting. Rose managed to pull that bit off and re-apply with no issues to my knowledge, I think she broke one or two clips, but we had some spares from the other targas.

It was Al,

Here ya go.......

http://www.300zx.co.uk/forums/showthread.php?t=151389

I take you mean the targa trim if so this is what you need mate. I followed the link and re did mine. About half way / three qtrs down the write up

http://s95014253.onlinehome.us/63104/13701.html

stu

Edited December 13, 201114 yr by Sussex stu
adding