Jump to content
View in the app

A better way to browse. Learn more.

300ZX Owners Club

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Got told a good tip today for removing the stone chipping on the sills and wings.

Use a heat gun and a metal scraper. Just heat up the stone chipping then scrape away the stonechip with the scraper. When removed sand the little bits left over off with a DA sander. This will take the sills back to bare metal and is much quicker than sanding it off.

 

This WONT work on the front or rear bumpers as they are molded stonechipping and you'll melt them. lol

Featured Replies

  • Author
How do you do the bumpers then? Fill then in with filler?

 

I used a very course grit glasspaper took as much off as I could then smoothed up with 800 grit wet and dry block. Finally a few coats of rattle can high build primer (or better still one coat of 2K HB primer).

 

Takes ages to do though I'm afraid :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Terms of Use

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.