Jump to content
View in the app

A better way to browse. Learn more.

300ZX Owners Club

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

trying to change the power steering belt

got the adjuster nuut undone but cant get the actual pump to move to get the belt off im working from under the car isthis the wrong way to go about it asm getting frustrated now at what should be a easy job any advice or diagrams will be helpfull please lads

Featured Replies

Have you undone the bolt that goes through the pulley hole? You may also need to tap it round with a rubber mallet.

  • Author

no is that the pulley where the belt goes round and which way does the pump go is it towards the centre of the car

If you line one of the holes up in the pully around the one oclock position you,ll see a bolt head which is either 14mm or 17mm , i cant remember which , slacken that and the pump should now move , just don,t forget to re-tighten it once the new belts on !! HTH

If you've already done the adjuster, you may need to pull on the pump with the old belt, they can be a real **** to move if they haven't been moved for a long time, in fact, mine has moved several times over the last few months, and it was still a **** to move last time I did it the other day!

  • Author

gave it up as a bad job just couldnt move the pump will leave it for someone else must admit defeat on this one lads

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Terms of Use

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.