can anyone please tell me or show me a picture of where the clutch fluid goes.:confused1:

No. 18 , not quite visible in pic - Clutch Master cylinder

 

http://www.300zx.co.uk/forums/showthread.php?t=26120

 

Small plastic resevoir with black cap.

 

2 bleed points, one by the Hicas solenoid above drivers headlight, and the other on the slave cylinder on the gearbox. Ripping out all that excess metal piping and replacing with a single braided line from Master cylinder to Slave cylinder makes bleeding a lot easier.

Edited June 3, 201114 yr by Yowser

No. 18 , not quite visible in pic - Clutch Master cylinder

 

http://www.300zx.co.uk/forums/showthread.php?t=26120

 

Small plastic resevoir with black cap.

 

2 bleed points, one by the Hicas solenoid above drivers headlight, and the other on the slave cylinder on the gearbox. Ripping out all that excess metal piping and replacing with a single braided line from Master cylinder to Slave cylinder makes bleeding a lot easier.

 

Amen to that :cool3:

Dont know if you got the system bled but I used to use a 12 v washer pump to back bleed the system from the slave cylinder up, used to work a treat.

 

Cheers John