As above, got a bit of a leak, I've done a search on the subject but didn't come up with a "how too" thread.

 

Your help would be much apprieciated :bow:

 

Ta Steve :)

Firstly disconnect the battery and remove.Lift the battery positive wire out of the retainers across the fire wall and raise the engine wiring up on to the plenum (gives a little room) youll need either a long screwdriver or socket extension(depending what clips are on the hose) and a pair of extra long nose pliers.Its very tight for room and youll probably swear once or twice but 30mins should see it done...Hope this helps...Lee

Firstly disconnect the battery and remove.Lift the battery positive wire out of the retainers across the fire wall and raise the engine wiring up on to the plenum (gives a little room) youll need either a long screwdriver or socket extension(depending what clips are on the hose) and a pair of extra long nose pliers.Its very tight for room and youll probably swear once or twice but 30mins should see it done...Hope this helps...Lee

 

Thanks Lee :) I'll get someone with more patience and less clumsy than me then :taz:

Thanks Lee :) I'll get someone with more patience and less clumsy than me then :taz:

 

Its not hard m8 just a little tight for room .You can do it :laugh: