Hey guys, after the thread i started awhile ago asking for the bhp advice i've decided what i want to go for as the final aim. I was going to start the work now but because i want to go to japfest i've decided to delay it until june so i do everything properly and at one time only, should be finished by mid/end of july as i've only got saturdays and sundays to work on it.

 

I will post pics here of the parts and the engine rebuilding when i start,

Like i mentioned in the other thread my aim is 500+ at the flywheel .

 

Final Spec:

 

615 injectors

Intercoolers

Pulleys

Chip (will only be used until i can get ryan to remap my Ems)

Aem ems

Koni suspension/lowering springs

Hicas eliminator bar

Rear tie rods

Uprated clutch stage 3 capable of 565 bhp/595 torque with lightned flywheel.

Gt28R turbos

Cometic headgaskets 88 x 1.2mm

Acl Main racing bearings and connecting

Cp piston ring set

Complete engine gasket kit

New Oem oil pump

New Oem water pump

Front Ksport 8 pot brakes

New starter motor

New alternator

Blitz induction

Baileys BOV

Apexi Avcr boost controller

Ams manifolds

Ams 3 inch expansion downpipes

Ams 3 to 2.5 inch test pipes

Spark plugs iridium heat 7

Nismo oil filter

Oem belts

 

 

 

To come soon :

 

2.5 inch exhaust

Dual pop chargers

Koyo radiator

 

I might be missing one or two things from that list but this is just what i can remember now . Also not going for cams yet , want to see the results for the above.

 

Portwork/polishing/valve jobs aswell .

 

As for the exterior i've decided to blend the bodykit next month and respray in Rosso Scuderia Red .

 

A massive thanks to everyone who's been so helpfull ( jimmer , smithy's, Stu etc .. ) really appreciated guys, top club ! Cant wait to go to JAE this year and my first too :clap:

 

Also here's pics of the wheels that i got refurbed in wrx gold : ) and lowered aswell now.

 

 

Uploaded with ImageShack.us

 

 

Uploaded with ImageShack.us

 

 

Uploaded with ImageShack.us

Edited June 15, 201114 yr by pixas
Edited

excellent build mate, i plan to do a lot of what your doing to the engine also when funds will allow!

 

also first time ive seen another set of the same bbs alloys as mine!

 

Keep it up!

cheers matey :D , i had always planned doing a complete rebuild myself but never wanted to take the car off road for so long and tbh i miss driving it :( buuut its nearly there kinda :D

 

and i do like the BBS just think i need spacers to get a better stance though : )

Excellent build you got going there. What rear bumper you got on it?. Looks fantastic.

keep up the good work.

Thanks matey , its a vapor rear bumper : )

Thats coming along nice that is. Look forward to the end result!!

looks great mate, she will be a beast!

Thanks guys , nice to have some nice feedback :biggrin: the car is going to get resprayed between this week and the next hopefully in rosso scuderia red ,it's almost the red i had on but this ones a bit brighter , will post pics when work starts .

The car was resprayed yesterday Ferrari rosso red, still has to be buffed/polished and alot of small things to be painted like rubbers, scuttle panel etc all in satin black but i chose not to have it buffed and polished yet until i have the engine in , the colour looks alot brighter than the previous one. I cant wait to see it all polished up : ) the wheels are also going to be re-done and gotta fix a small crack on the carbon fibre bonnet that's going back on as i like the contrast with the red/carbon. some pics even though quality isn't that great :

 

 

 

 

 

 

 

 

 

 

car is looking much better since i saw it...really liking the fresh paintwork with the blending :D gonna be one hell of a beast. Bom trabalho amigo.

here are some pics of the parts , one thing that i intend on doing is changing the intercoolers later on for ashspecs with 2.5 piping but for now it will do the job : )

 

Intercoolers :

 

Injectors + chip

 

AEM Ems:

 

Hicas eliminator bar

 

Read end tie rods

 

Koni suspension with lowering springs:

 

Lightweight crank pulley :

 

New alternator

 

New starter motor

 

Gauges , however gonna fit it with a new full pillar pod

Gt28R turbos :

 

 

cometic head gaskets 1.2 88mm

 

Oem new oil pump

 

Oem new water pump

 

Oem nissan timing belt

 

Cp piston ring set and Acl main bearing and connecting bearings

 

 

Ams manifolds , nismo oil filter , ngk spark plugs heat 7 , stainless steel clutch line and pivot ball. wanted MS manifolds but it was a 5-6 week wait so i had to buy these

 

 

 

Full Oem engine gasket, 3 inch expansion downpipes Ams, Ams 3-2.5 inch test pipes and pcv hoses and valves

 

 

 

 

 

 

 

it had a 3 angle valve job previously done aswell

 

 

Hopefully not long before it's on the road, still a few things needed but it's well on the way : )

Hey guys , unfortunately the project had to stop for a few months as i had to go work out of the city but i've been back for two weeks now and i've started on it already , engine is now put back together and in place , here's a few pics and hoping to have it back on the road in two or three sundays time as i only work on it then.

 

 

 

 

 

 

 

 

The exterior is done apart from the carbon bonnet thats still going back on it and stills needs a good machine polish and a few things here and there.

Cant wait to have it back on the road now : ) altho the weather is rubbish now :no:

This is a very thorough rebuild going on! Well done on the progress. T28's are going to give you some pretty impressive shove - be careful in the crappy weather before you go unleashing the full fury!

 

Well done Pixas - bodywork very unique on this car and looking lovely after the respray.

thanks for the nice feedback mate much appreciated : ) gives a bloody headache but its all worth it when we see the results. its a shame that i couldnt go to JAE really wanted to go :(

 

and indeed about the weather but at least it doesnt rain all the time in the winter lol , really trying to go to the zedworld december meet.

 

i really wanted to have something different hence why i went for this look , i personally love it otherwise i wouldnt have blended all in , i must be a crazy but oh well lol :innocent:

 

still have bigger plans for next year but for now it will be more than enough to have fun :D:D

Get ready for the "Look mum, there's a Ferrari!" kids comments!! LOL

 

Didn't see a boost controller in that lot - or have you already got one?

 

What the hell have you got planned for next year? 500bhp not enough eh? :scared:

haha :D already got one mate an Apexi Avcr. its enough i think lol :D but i want to change other things like the koni suspension ( altho its new ) for a full SPL coilover system, 2.5'' intercooler pipes/different intercoolers, better clutch, cams but it depends on how the car will be really but for now im sure it will be okay : )