Does anyone know what bung I need, maybe a link to one? I've lost the original but don't fancy the 5p jobby anyways...

Just get the nut pool welded up,easy !

i pool welded mine up, although i did still put a 5p in and then welded on to it :D

Lost the original though ??

i might have one i bought but never used

or if you really want a proper one, z1 in the states have them...

 

i bought one, because i didn't want to bodge my zed, (or more to the point don't have a welder...:oops: )

 

although its an expensive way of doing the job of a 5p

manifold is on the car, I'm a good welder, but wouldn't try and pool weld the hold in the manifold, I don't want anything dropping in that would get blasted through the turbo... just wish I could find the original, and pool weld that, but I can't find it! either way, it has to be done tomorrow, so I'll find something...

I got a gas fitting from wickes good as gold..

manifold is on the car, I'm a good welder, but wouldn't try and pool weld the hold in the manifold, I don't want anything dropping in that would get blasted through the turbo... just wish I could find the original, and pool weld that, but I can't find it! either way, it has to be done tomorrow, so I'll find something...

 

You're not welding the hole up on the manifold. It's a plug that the old egr pipe went into that your welding shut. This can then be put back into the thread on the manifold.

http://www.screwfix.com/prods/58059/Plumbing/Compression-Fittings/Yorkshire-Kuterlite-Stop-End-651-28mm

 

Think this is the one I used. will have a look tomorrow.