Hi, I`ve just noticed today that I`ve only got full beam lights? If i turn the switch to side lights I get nothing and then switch again to the main lights its just the full beam and the blue dash bulb lights up, I pulled the stalk back and fourth and nothing happens, any suggestions?

 

Daz

fuse has blown. 3rd from the left top row red 10 amp fuse :wink:

fuse has blown. 3rd from the left top row red 10 amp fuse :wink:

 

:bow::bow:

 

Nice one dude, just done it and all is well :thumbup:

 

Thanks

:winkiss:

I`ve still got this problem??? No side lights just full beam, fuse is still intact , indicators work and so do brake lights???

 

Any suggestions please

 

Thanks

Which fuses did you check ? The culprit is typically the one on top row in the drivers footwell.

 

Full beam is hte safety state for when there is a problem, to eenable you to see where you going still if the circuit breaks.

Look at the relays in the large fuse box pasenger side front of engine, think it's a blue relay, should be marked on the lid anyways.

You might be able to swap around 1 or 2 of them to confirm it is a relay.

smithy

Which fuses did you check ? The culprit is typically the one on top row in the drivers footwell.

 

Full beam is hte safety state for when there is a problem, to eenable you to see where you going still if the circuit breaks.

 

I`ve checked all the fuses in the drivers footwell, but not checked under the bonnet yet :sad:

Look at the relays in the large fuse box pasenger side front of engine, think it's a blue relay, should be marked on the lid anyways.

You might be able to swap around 1 or 2 of them to confirm it is a relay.

smithy

 

Ok, many thanks, I will go and have a gander in a min

You will continue to have problems until you chrome up all the fuses :tt2:

Daz, I had this issue with Zedward - replaced the fuses, bulbs, nothing made any difference. Turns out I had an earth issue which an auto electrician has to sort out for me in the end :pinch:

Daz, I had this issue with Zedward - replaced the fuses, bulbs, nothing made any difference. Turns out I had an earth issue which an auto electrician has to sort out for me in the end :pinch:

 

Ok Thanks Jan!! I`ve been messing around with the fuse box and wires of latley so your probably right, it was working fine before i messed with them, thanks for the heads up :cool3:

You will continue to have problems until you chrome up all the fuses :tt2:

 

No theres an idea!!!!! :tt2:

Bah I had this, it was a 10a fuse in the drivers footwell.. and then it went again an hour later... and again 2 days later lol! Pissed me off being sat upside down in the car at night refitting fuses :p

Bah I had this, it was a 10a fuse in the drivers footwell.. and then it went again an hour later... and again 2 days later lol! Pissed me off being sat upside down in the car at night refitting fuses :p

 

What was the problem in the end bud? did you get it sorted?

 

CheerZ

Have you checked the relays/fuses in the main box in engine bay yet? dam site easier than the footwell one lol

smithy

What was the problem in the end bud? did you get it sorted?

 

CheerZ

 

I know the answer to this Daz - he put a nail in there :tt2: Didn't blow after :whistling: