Got some 6x9s (Kenwood KFC 6907) and wanted to know whether they would fit ok in the front doors?

 

Is anyone able to help? Just thought I'd ask the question before taking the cards off.

 

also, I assume I won't need an amp to run these? I assumed they would run just fine off the headunit.

 

Thanks

Should do, mine took a bit of modding but not a lot iirc.

Suppose it depends on the wattage if an Amp is needed?-I have a 50watt h/unit that runs 300 watt speakers fine.

That's the problem...I have no idea what the specs of my headunit are. It came with the car....I do have a 12" sub too which I'm hoping to stick in the boot so I guess I may as well invest in an amp to run both...

 

Cheers

Do a Make & Model number search on the web for the specs.

Or post up here and someone may be able to help.

Do a Make & Model number search on the web for the specs.

Or post up here and someone may be able to help.

 

Good plan...this is what I found...

 

http://www.amazon.co.uk/Kenwood-KFC-6907-Car-Loudspeaker/dp/B0000YVDFM

 

Direction (1-4 Way): 3 way

Installation: Built-In

Installation Type: Built-In

Number of Ways: 3

Oval Size In mm: 155 X 225

Oval size (mm): 150 X 230

Power (Watts): 25+ watts

Speakers Format: Oval

System/Single Speaker: Single Speaker

Type of Set: Pair

Wattage: 200

Ways: 3

 

Is anyone able to help?

I know absolutely bugger all about ICE.. but I do know that one of my previous Z's I fitted 6x9s in the front doors, just cut the door card to suit and mounted them, they looked and sounded great. :thumbup1:

I know absolutely bugger all about ICE.. but I do know that one of my previous Z's I fitted 6x9s in the front doors, just cut the door card to suit and mounted them, they looked and sounded great. :thumbup1:

 

Cheers dude...I think that'll probably be the route I need to go down...just want to see if anyone has a definitive answer for me before I go mutilating the Zed!

they are usually pretty easy to fit there if you use a bit of mdf to pack inbetween the door card and the door you get a more secure fitting

they are usually pretty easy to fit there if you use a bit of mdf to pack inbetween the door card and the door you get a more secure fitting

 

Thanks bud...!

Do a Make & Model number search on the web for the specs.

Or post up here and someone may be able to help.

 

Good plan...this is what I found...

 

http://www.amazon.co.uk/Kenwood-KFC-6907-Car-Loudspeaker/dp/B0000YVDFM

 

Direction (1-4 Way): 3 way

Installation: Built-In

Installation Type: Built-In

Number of Ways: 3

Oval Size In mm: 155 X 225

Oval size (mm): 150 X 230

Power (Watts): 25+ watts

Speakers Format: Oval

System/Single Speaker: Single Speaker

Type of Set: Pair

Wattage: 200

Ways: 3

 

Is anyone able to help?

 

Sorry bud, what I meant was to do a search for the Headunit specs!

im sure they will be fine off your HU, but will be much better amped! and have a look here

 

http://www.300zx.co.uk/forums/showthread.php?t=142450

Sorry bud, what I meant was to do a search for the Headunit specs!

 

lo...OH! I'll see what I can dig out!

found a pic of my old Z with infinity 6x9s in the front door :thumbup:

 

found a pic of my old Z with infinity 6x9s in the front door :thumbup:

 

 

They don't look half bad! I might have go at fabricated these mdf 'sandwich' plates then! :cool3: