Well my boost controller turned up today, but I'm hoping someone will be able to tell me the answers to the following:

 

1. What diameter tubing do I need to run from the turbo's/actuator and any ideas on how long a length I should get.

 

2. Where's the best place to take a manifold pressure reading from to plumb into the control unit? Pictures would be great ;)

 

I know how to plum/wire into the TT system just don't want to go crawling around under the car to get tube diameters if I can help it lol.

 

Cheers, Brendan

I used 8mm blue hose off of ebay for mine and used 4 metres of it plus you can get all the hose T pieces and clamps from same place.

 

I plummed my boost pipe into the small hose coming off of the balance pipe on the right hand side going towards the brake master cylinder. Its a good size for the T piece that comes with the Blitz kit.

 

Do you have single solenoid or dual as i used T pieces on my boost hoses as i have single solenoid.

 

Hope this helps ya

 

Marty

Cheers mate, looks like you've just saved me getting dirty before having to do anything!! Is the 8mm ID? I figured I'd need about 3m, but I'll get 4 to be on the safe side.

Yes it is this is the stuff i used

 

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250369050017&ssPageName=STRK:MEWNX:IT