Aftermarket steering Boss

August 18, 200916 yr

will anybody own up to have ever purchased one of these for there aftermarket steering wheel.

I'll start it off , i raise my hands, i did. Phew , that wasn't so bad after all.

ebay link

Quote

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.

Reply to this topic...

My daughter calls it Toothless the Dragon: My ‘95 TT Z

By nickz32 · 29 minutes ago29 min
My daughter calls it Toothless the Dragon: My ‘95 TT Z

Crank back from OCS and happy to report she’s straight as an arrow with less that 1 micron of runout.
went with Torco MPZ assembly lube after numerous recommendations from engine builder friends of mine.

Main bearing clearances came up nice and even at 0.0026” give or take a couple of ten thousandths, and the crank spins over nice and smooth

By nickz32 · 30 minutes ago30 min
JaiKai - MK2 - Ziggy Build

Also start to attach all the auxiliary hoses like the water pipes and vac pipes.
However thinking this would be simple would be wrong; things have been scattered over the years and a few of the pipes are missing.
So thought i'll crack on to the plenum so i fitted the fuel rail down nice and snug.
Next issue we have - Spark plugs - no-where to be found !!
So looks like i'm building another list of parts thats needed.

By JaiKai · Monday at 12:532 days
JaiKai - MK2 - Ziggy Build

Back to work on the zed this morning and all was going well until i discovered that the stock intake turbo pipes wont fit with the oem heat sheilds.
appears the clearance isnt there so i had to take them back off .

By JaiKai · Monday at 12:492 days
JaiKai - MK2 - Ziggy Build

Z1 GT525+'s

By JaiKai · Sunday at 20:492 days