I have one for sale at the moment in the for sale section and someone has asked me if the "spec S" is suitable for the TT? and that isnt the twin solenoid "spec R" the right one for the TT.

 

As I bought it from an advert on this very forum I assumed it was for the ZX, however I have no way of knowing asI never actually fitted it to my car.

 

CAn some one please confirm if the spec S BC with a single solenoid is suitable for the TT

 

Many thanks in advance

it should be fine. you just run a T piece to split the single pipe from the solenoid to run both actuators.

iirc the twin solenoid version is only to enable you to control higher boost levels (above the spec of a standard engine with standard turbos)

HTH

it should be fine. you just run a T piece to split the single pipe from the solenoid to run both actuators.

iirc the twin solenoid version is only to enable you to control higher boost levels (above the spec of a standard engine with standard turbos)

HTH

 

Many thanks for that

it should be fine. you just run a T piece to split the single pipe from the solenoid to run both actuators.

iirc the twin solenoid version is only to enable you to control higher boost levels (above the spec of a standard engine with standard turbos)

HTH

 

where do i get one of these from? would like to buy off this nice fella hastings however would like to get it in asap.

 

where can i find this t piece?

just read that type S is not recommended for twin turbo on the aus300zx site and various other sites.