General Discussions - 300ZX Related

On the M42 near Birimingham at around 5.15 today?

Just to let you all know, I picked up the calendars today. Problem is, 90 members have their name down for calendars, however, only 39 have been paid and addresses forwarded to myself. If you have your name down, can you please get your address to me ASAP, so I can get these in the post. There are still calendars available for those who want one but haven't yet put their names down. Just add you name to the Calendar Payment thread and PM me your address. Cheers Steve

just bought weseco forged pistons/eagle rods,metal headgaskets delivered £520 whooo hoo these will do nicely for my spare engine build, and got some jwt650 turbo's with 5 bolt downpipes to compliment engine well for a very good price....and thats without traction control that has been ordered and paid for by a very good friend of mine jaypsc.. comes

In the past 2 weeks I`ve spent over £1100 :shock: on shiney things and stuff for my Zed - where does it end :rofl:

Does anyone know if it is possible to get an Apexi EL2 oil pressure gauge sender seperately anywhere? If so, how much? Cheers.

Just got back in from picking it up, its very nice ;) Used to belong to a member on here a while ago and is still in as good a nick and its in the best colour :tongue: Its tucked up in bed now but will take a few picks tomorrow :cool: Its been a bloody long day so i'm having a beer :duffer: Mike

seeing as i dont have an aerial at the moment or a rear wiper i was wondering about using the redundant rear window washer for an aerial mount instead.....not sure what look would be suitable or what options there are...anyone got pics or products that would look nice on my zed cheers

ok guys, I destroy my engine and i have 2 eagle rods death. Nobody want to sell only 2 so if one of you have spares or if another one need also 2/3 or 4 rods, we could buy together the whole kit :) Please tell me you need some :)

does a tt have a safe engine or does it bugger the valves when the cam belt brakes???

OK, here are the pics of the first set of Nitron shocks. These are the 3 way adjustable for James.

Over the weekend I upgraded by brakes. I have never done this before, only half watched hubbie do my Rover's rears. I read up like a good girl and thought oh well how hard can it be. Saturday was going great untill I couldn't get the calipers off. Had to send hubbie to buy me a bar braker lol I got very dirty, hot and sweaty but I managed to do it. New Brembo 10 groved discs and red pads. Sunday came the rears, this time I had a better idea just what I was doing. Off came the old worn away pads, the calipers and the worn down disc's. I replaced them with Brembo 10grove and red pads, and put the wheels back on. Great I think, then oh no h…

hi wat size r front discs on z32 n/a. please. the thicknes dose this matter? :smash:

Happy birthday bud ... have an enjoyable day n we'll have :duffer: :duffer: soon John

Well guess what, come up to sheffield to have my new exhaust fitted and 2 miles from junction 34 where i get off my bloomin cars rad blows. Exactly the same problem as with my na's rad, the input on the left hand side blew clean off :rant: Lucky i have a spare rad at home but i'll be going home on a low loader, oh well... old exhausts and cats are off and new cross flow is being mackled up as we speak, i just happen to be using pete's pc while he's having brekky :D There goes all the plans for this afternoon out the window! :rolleyes:

Do you guys recommend using this type of fuel additive injector cleaner on zeds? Iv used it on previous cars every 6 months or so and never had any problems but didnt know if it would be suitable for a zed.

Started the car this morning to find Hicas warning light remains lit, what symptoms does this refer too, could it be just the fluid level?

Well though's who know me, will no i finished a relief at another pub on monday, First shift back at my pub last night...... finished the hand over with the other manager as she went on Holiday yesterday, came down to the bar and my supervisor said to me " i've stopped serving though's 2 girls because they have been in since 11am and they're well pissed!" this was at 4.45pm :shock: any way about 5 min later they started to leave though it was quite funny seeing them try to walk out, they could bearly stand!! watched them leave the pub and head for the car park.... just getting coats i though.... fook me was i wrong, they both got in the car and tried to start it up :…

why does everyone hark on about evos skylines and subarus??? i have only had my zed for a couple of months and am having a lot of fun in it skylines cost a fortune and the stock evos and scoobies arent that quick why does everyone buy em and boast about them ??????????

I was giving these brackets, believe they are to fit a radio. How are they fixed in as i dont have the fixings. The gap above, i bought a compartment from the z shop or whatever butr again no idea how to fit it. Will try upload the pics http://i53.photobucket.com/albums/g78/mcintyc/DSC00337.jpg http://i53.photobucket.com/albums/g78/mcintyc/DSC00336.jpg

out in the motor the other day and my wipers stopped working, could here the motor goin but no movement on the arms. to add insult to injury it started to rain and i ended up havin to drive the car home with the window open like ace ventura pet detective. next day i stripped the panel in front of the window to get a look at the wiper motor mechanism and discovered the arm that runs from the motor to the wipers was missing......not off but gone????. i had a look down both sides and i cant see it. my question is this were has the ****a gone. i mean it must of been there to make the wipers work in the first place. i think the aliens came down and put me in a time lock an…

Hi, I've just changed the rear discs and pads with absolutely no problems at all. :) Then to the fronts... The disc looks correct, but I just can't get the caliper to fit correctly over the disc - the disc seems to be slightly (0.5mm) outboard to far - I have cleaned up the hub assy and tried to push the disc full home but to no avail. The caliper fits around the disc - but cannot be bolted back without fouling on the outer surface of the disc. So, decided the disc was out of spec, had the motor factors get me a replacement set from a different manufacturer... looks like i'm going to have the same problem again... they are dimensionally identical. …

i'm looking to change my stock suspention,any ideeas what can i get and how much ?

My Z went onto 4 cylinders so took it to SWZ to check compresion and 0 psi from cylinder 1. Anybody found one that low and do i win a prize for the most fecked engine?

Anyone else spotted the zed on the Orange advert with the little dancing men?

Hi all, i currently own a uk twin turbo and the clutch is mullered! I have purchased a new clutch kit with release bearing, driven plate and friction plate, i've been to my local garage and they've told me it's a big job and they can't fit me in for 2 weeks. Does any one know of any good garages in the Mansfield/Nottinghamshire area that would be able to tackle the job? Cheers Sean