General Discussions - Non 300ZX

Anybody on here got a motorola data kit or have any idea of how much they cost. Any links known that might have it downloadable. All i need is the software which would be on the CD as i have a USB cable that fits perfect. Any ideas?????

after a big arse smell of petrol in the car all the time me and kev (white zed) got round tochanging the pipes today. got them on and fitted only to find one jubilee clip was fooked!! so i put a better type clamp on. all was fine then a big arse smell of petrol again... just by luck i found it. it was the small length of pipe that connects the fuel rail under the throttle cable link. was going to take the throtle bodies off but decided not to.. ( i would only fook it up!!) but managed to move and re-tighten the clamps. bingo no more fuel smell. i am going to suggest to smithy that he offers to include or does include another section of pipe to replace…

Hi, Anyone know how I can remove the handle from a UPVC window if the handle is in the closed position? Cheers Vijay

what skylines come in a uk spec

bit of a long one but some mental driving http://cant copy and post a link right :nelson: wrong link go to the one below :x:

Discovered this place recently, could help with discounts for group buys etc etc https://www.boilerjuice.com

:headvswal :rant: just topped z up with £25worth of optimax dropped my children back to their mother and discovered a massive fuel leak so ive done all of 6 miles for £25 and my boot was full of things that i was gonna ask tpot to fit for me as we were on our way down to see him and debs for a brew etc fooking gutted ive had two parts of pipe replaced before should i have a complete new one fitted :confused: thanx for letting me rant guys :rant: :rant: :rant: :rant: ;)

pple what u think of this ride?. http://www.gtr.co.uk/forum/upload/showthread.php?t=51799

I just took mine out after the release bearing was very loud and couldnt get it into gear. the cover inside the bellhousing that the release bearing slides up and down has broke so has the carrier for the release bearing and the fork is cracked. If anyones got a knacked box they wanna sell me the bits off give me a shout cheers

That I can't spray for toffee! :headvswal Done the bonnet but fook me it's rough! :o Need a nice little piece of mesh now..............

Not in the Zed - in the bathroom - the hot tap drips. I can turn off the hot water but does anyone know how I take the tap to bits? Does the top just screw off or will I need to unbolt it somewhere? Cheers gents! :hyper:

do you think there worth buying or are they not worth the money http://cgi.ebay.co.uk/DENSO-IRIDIUM-Spark-Plugs-NISSAN-300ZX-mk2-Z32-1990_W0QQitemZ4625169647QQcategoryZ10402QQrdZ1QQcmdZViewItem

:dance: :dance: Well after 3 monhs of engine out,gearbox conversion,new suspension and god knows what else ive done shes finaly running right. A HUGE thank you to John Dixon for sorting out my problem. The only problem i have now is people jumping out on the road between parked cars to see what the noise is when im coming.As the new tubs and downpipes make a hell of a din LOL :dance: :dance:

well i just bought a USB to serial (db9) adaptor so that i could plug my laptop into my traction control unit to log data and save my settings.. now tell me this.. why would you spend so much on a system like this and keep it on default settings? it was set to 4 cylinders, every default setting imaginable- i couldn't believe it! idiots! anyway i downloaded a data file from the members section on here and fine tuned it a little bit and the car seems to run a little better although i've not actually tried the traction control to it's limits yet! Moral of the story.. if you bought your car with TC fitted go check the settings out asap just in case th…

Nothing major just some suspension bushes and an oil pressure gauge. Now I don't like to be the same as everybody else so I was thinking of mounting the new gauge, along with others to follow, somewhere different but I can't think :( This is where you lot come in, get thinking.

Hi finally subscribed. I have a swb tt auto zed. I bought it of my friend’s dad after he wrote it off!! Was rear-ended but there was no major structural damage. Loved the car from the first time I bought it and I could not see it get scrapped. Bought it for £400 off the insurance co. I don’t really have that much money to put into it so I have just done what I can. All in all after the jigging and spraying and parts its cost about £1200. I will post some pics of it as soon as I get some web space. Its not up to the standard of most of your zeds but had to have her back on the road. Still got a couple of probs but with your help hope to resolve them. What’s the best …

Well, managed to get a lowrider air cleaner!-so the bulge aint' got to be massive afterall-gonna use a modified zcentre bonnet vent! :wack: Oh-and Iv'e been making holes again :D Bit o glue and a bit o filler.......you'd never know :o

We have a dyno day organised in the NW for this date. click here to go straight to the thread :D Cheers Pete

come on chaps Vijay has gone out of his way to sort this :rolleyes: http://www.300zx.co.uk/forums/showthread.php?t=64727&page=5&pp=15

prince naseem crashes his 300,000 merc SLR, how can he be so careless in such a car :headvswal :( p://www.automotiveforums.com/vbulletin/showpost.php?p=3070445&postcount=3

When im driving around on a morning (or just when its cold and car been sitting for a while) there seems to be a lot of smoke coming out the back, Is this normal for a zed??? :x:

Are these any good? seat covers Or would I be better getting my seats re-trimmed by a professional?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4623370865

Hello guys ive been searching tons on here to see if i can find a pic of my old TT Zed.. Red J Spec.. tons of engine mods Kahn RSR 18's red and black leather interior .. i had it stolen a few years ago before the site had the forum and the car was up on the front page for ages as stolen .. i would just like to get a pic of it as all the pics i had were lost.. the no plate was TOP 237 S any help would be greatly appreciated Thanks John

As above mate. :duffer: